jonc101 Posted April 28, 2013 Share Posted April 28, 2013 I have an H80i fitted. I have the LED1 set to the Temperature LED mode. The colors never seem to work. I have the temperatures and associated color assigned as follows: 25 - Blue 35 - Yellow 55 - Red Even with the CPU at 70 degrees the color on the actual pump never changes to red. Instead it's a blend of somewhere between yellow and orange. Why does this not work the way I think it's supposed to work? Link to comment Share on other sites More sharing options...
Speed Posted April 29, 2013 Share Posted April 29, 2013 How are your fans and LED grouped? If your fans and LED are grouped with the H80i Water Block (fans should be but LED doesn't have to), the temperature range is very narrow. Mine are set to: 27, 29, 30, 31, 33 for the fan steps because it is sensing the water temperature, which doesn't fluctuate very much. If the LED is grouped to the CPU, then at 70C it sure should be red; unless, of course, the LEDs are hosed like so many others being reported here. That there is orange color says that the red LED is working, however. Link to comment Share on other sites More sharing options...
jonc101 Posted May 3, 2013 Author Share Posted May 3, 2013 That's exactly it. I had the led grouped with the waterblock. I moved it over to the CPU group and now the led is working as I expect. Thanks for the help. Link to comment Share on other sites More sharing options...
thenosbod Posted May 12, 2013 Share Posted May 12, 2013 can the LED be turned off? Link to comment Share on other sites More sharing options...
wytnyt Posted May 12, 2013 Share Posted May 12, 2013 can the LED be turned off? yes just turn them to black Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.