will_s Posted January 21, 2020 Share Posted January 21, 2020 Hydro X Configurater is pretty good but in my Lian Li 011 and Aorus X570 Master putting the 55mm radiator in the bottom is a no go. You cant get the USB3 cable in ( you can put it in first but the radiator will just bend and break it ) Still you can put the X5 rad at the rear vertically and put the X7 rad (55mm )on the top like in the pic but its a tight fit with the power cables in the top right of motherboards. Also allows you to put in a riser card and mount your Corsair Hydro X Series XG7 RGB at 90 degrees Link to comment Share on other sites More sharing options...
tiborrr Posted January 22, 2020 Share Posted January 22, 2020 Yes, bottom rad is usually a tight fit and a compromise. These USB3.0 ports are horrible, I'd recommend you take an 90° USB 3.0 internal adapter: https://www.amazon.com/Cablecc-Extension-Adapter-Motherboard-Mainboard/dp/B07FMNJ66H/ This will solve your issue. Make sure you get the correct one :) Link to comment Share on other sites More sharing options...
will_s Posted January 22, 2020 Author Share Posted January 22, 2020 in future I may get one but I have put in a riser card ( and it worked ) Link to comment Share on other sites More sharing options...
Recommended Posts