Santa_ryan Posted November 21, 2019 Share Posted November 21, 2019 How do I actually turn off the Virtuoso SE? If I flip to USB mode while it's plugged into power to charge overnight, it shows bright blue LEDs and the boom mic goes red. If I flip to wireless, the dongle on the computer wakes up, and the headset goes into rainbow mode. Can you seriously not charge this overnight without a very bright light show?!? Link to comment Share on other sites More sharing options...
JonSuder Posted November 21, 2019 Share Posted November 21, 2019 You can, just leave it somewhere. It will turn off after 10 minutes 1 Link to comment Share on other sites More sharing options...
TheMaskedShadow Posted November 21, 2019 Share Posted November 21, 2019 (edited) Whenever I want to shut down all lights on everything, I do the following: Virtuoso: - Put Virtuoso in USB mode and effectively plug it in a USB port (so that dongle doesn't flash anymore) - Put the mic *ON* in iCUE: - in main menu, select Black as "INSTANT LIGHTING", which in effect, turn off the leds - under Virtuoso settings, check "Disable LED when microphone is active" on K70 mk2.se keyboard: - Click on light intensity button until those special buttons turn off - Press on whatever button remains to shut down the light indicator (Caps lock, num lock or scroll lock) With all that, no more lights. Not ideal but it gets the job done. Hope it helps Edited November 21, 2019 by TheMaskedShadow Fixed menu name Link to comment Share on other sites More sharing options...
Santa_ryan Posted November 21, 2019 Author Share Posted November 21, 2019 (edited) You can, just leave it somewhere. It will turn off after 10 minutes That's... annoying, but okay. Not that I've actually had time to try this, but does the automatic shut off still occur if you've disabled automatic shutdown in iCue? I.E., does the automatic shutoff option within iCue save state to the headset itself, thus preventing shutdown even if it can't talk to the computer (iCue changes some value in the firmware nvram)? Further, if the automatic 10 minute shutdown is baked into the firmware on loss of contact, can this be adjusted? If not, add that to the requested feature list! I'd like for it to follow whatever I have iCue set up as, unless I lose contact (the computer shuts down). If I lose contact, I'd prefer all lights to go dark and the entire headset just go to sleep after a minute or so. Edited November 21, 2019 by Santa_ryan Link to comment Share on other sites More sharing options...
Santa_ryan Posted November 23, 2019 Author Share Posted November 23, 2019 You can, just leave it somewhere. It will turn off after 10 minutes So, this doesn't work. I used a wall charger and waited 10 minutes on both USB and wireless mode. Same behavior where the lights stayed on. Link to comment Share on other sites More sharing options...
SauDepp Posted November 23, 2019 Share Posted November 23, 2019 (edited) ....since the last iCue update mine works as supposed to.... I use it in wireless mode, 3min. autoshutdown - headset disables itself, dongle switches its light out after a few minutes - everything calm! There is no need to load it over night - 1-2h should do ok to fill the battery. So I´m loading it while sitting at my rig, doing some mailstuff - and yes! The lights are fully switched on while the set is loading with a wallplug - annoying but at least at night there is no light pollution anymore.... I think it is wrong by design - they were so proud of the headsets style, they wanted that thing to glow all night long :( The same thing goes with the sound - they tried to make it more precise, and simply seem to forget about the bass :( Edited November 23, 2019 by SauDepp Link to comment Share on other sites More sharing options...
domsson Posted January 7, 2021 Share Posted January 7, 2021 This might be an old thread, but I came here via search engine, so I assume others will do the same. Here is how to turn off the Corsair Virtuoso: Make sure the microphone is plugged in Hold the mute button for 10 seconds Link to comment Share on other sites More sharing options...
gizohan Posted January 25, 2021 Share Posted January 25, 2021 This does work but not when it is charging. The lights will stay on Link to comment Share on other sites More sharing options...
Rocal Posted March 11, 2022 Share Posted March 11, 2022 On 1/7/2021 at 6:26 AM, domsson said: This might be an old thread, but I came here via search engine, so I assume others will do the same. Here is how to turn off the Corsair Virtuoso: Make sure the microphone is plugged in Hold the mute button for 10 seconds Nice!! good catch. I just bought them so I didn't test it too much but I'm curious anyways if the sleeping mode is considerable more consumer than switching to USB mode without having the headsets plugged to the cable Link to comment Share on other sites More sharing options...
Jqcob Posted July 26, 2023 Share Posted July 26, 2023 How do I turn off the corsair Virtuoso se headset !! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now