djriful Posted June 12, 2012 Share Posted June 12, 2012 I have Corsair Force GT 120GB connected to the Brown port which is the Intel 6Gbps. I have AHCI enabled in BIOS and in Windows as well. I still see blank and I cannot proceed any firmware updates. This is frustrating. Thanks! Link to comment Share on other sites More sharing options...
djriful Posted June 12, 2012 Author Share Posted June 12, 2012 Would this be the problem because all my HDD and SSD are under SCSI mode instead of AHCI? Link to comment Share on other sites More sharing options...
djriful Posted June 12, 2012 Author Share Posted June 12, 2012 This is one PAINFUL solution. 1. I had to find a spare HDD. 2. Install a new Windows 7 3. All my Drives shows as ATA instead of the stupid SCSI driver which I cannot remove. 4. Successful updating my SSD. Please contact SCSI to Intel. This driver will be problematic for future users who installed Intel RTS or RST software. Even you uninstalled it, the driver remains and the original Windows 7 ATA driver is gone. Link to comment Share on other sites More sharing options...
darkandedgy Posted June 24, 2012 Share Posted June 24, 2012 3. All my Drives shows as ATA instead of the stupid SCSI driver which I cannot remove. 4. Successful updating my SSD. Please contact SCSI to Intel. This driver will be problematic for future users who installed Intel RTS or RST software. Even you uninstalled it, the driver remains and the original Windows 7 ATA driver is gone. Can you elaborate on what you did here, please? :) Link to comment Share on other sites More sharing options...
Toasted Posted June 25, 2012 Share Posted June 25, 2012 Don't use the Intel RST Drivers as it shows the drives as SCSI devices instead of ATA. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.