leahd4 Posted February 27, 2015 Share Posted February 27, 2015 hi all i have 2 corsair 120gb ls not on raid both on sata 0 and sata 1 wich is 6gb/s i also have 1tb wd black when i move file from my hdd to my ssd its around 80-100 mb/s but when i move the same file between my ssd's its jumpin all over the place startin from 1-250 mb/s its large file on ssd benchmarks utilities i get 450-490 transfer rate on both ssd's any 1 knows why its happenin? Link to comment Share on other sites More sharing options...
Synthohol Posted February 27, 2015 Share Posted February 27, 2015 maybe because they are using the same controller chip on the MB that is trying to read and write at the same time back to itself? Link to comment Share on other sites More sharing options...
olive Posted February 28, 2015 Share Posted February 28, 2015 on ssd benchmarks utilities i get 450-490 transfer rate on both ssd's which one ? just check the difference between crystal disk mark and ATTO , you'll be surprised ... For the other part of the problem, since ssd are sensible to highly compressed data , i guess it depends on the file compression you are trying to move. I've got myself one of these, could you post the result of a sequential write/read with crystalDiskMark please ? i only reach 40MB/s on write , 120MB/s on read ... Something is wrong here :P Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.