chuckiechan Posted January 8, 2018 Share Posted January 8, 2018 Total Size Something doesn't look right to me, but there may be something I don't understand going on. 16384 MB Type Dual Channel (128 bit) DDR3-SDRAM Frequency 665.2 MHz - Ratio 3:10 Timings 9-9-9-24-34 (tCAS-tRC-tRP-tRAS-tCS) Slot #1 Module Corsair 4096 MB (DDR3-1337) - XMP 1.2 - P/N: CMX8GX3M2A1333C9 Slot #2 Module Corsair 4096 MB (DDR3-1062) - XMP 1.2 - P/N: CMX8GX3M2A1333C9 Slot #3 Module Corsair 4096 MB (DDR3-1337) - XMP 1.2 - P/N: CMX8GX3M2A1333C9 Slot #4 Module Corsair 4096 MB (DDR3-1337) - XMP 1.2 - P/N: CMX8GX3M2A1333C9 Do I have bad ram or is this normal something or other going on? EDIT: CPU-Z shows slots 1,3,4, as PC3-10700H(667Mhz) Slot 2 as PC3 - 8500F (533HZ) All four sticks are the same, including rev #'s :o Support is not working. Does it still exist? Link to comment Share on other sites More sharing options...
emissary42 Posted January 9, 2018 Share Posted January 9, 2018 Does module 2 have a profile for DDR3-1333 9-9-9-24 1.5V listed in the SPD tab? Link to comment Share on other sites More sharing options...
chuckiechan Posted January 10, 2018 Author Share Posted January 10, 2018 https://imgur.com/yWcKuAE Link to comment Share on other sites More sharing options...
emissary42 Posted January 12, 2018 Share Posted January 12, 2018 To me it looks like the module was misprogrammed. I would open a ticket at Corsair support and see what an official says about that. Link to comment Share on other sites More sharing options...
chuckiechan Posted January 12, 2018 Author Share Posted January 12, 2018 To me it looks like the module was misprogrammed. I would open a ticket at Corsair support and see what an official says about that. I'll try that. Things seem to be running OK. I guess Corsair doesn't come to this forum. Wonderful. EDIT: I finally got the support ticket in. Thanks for your help. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.