deezrobz Posted March 23, 2019 Share Posted March 23, 2019 I have the black corsair spec omega rgb, and it's a really nice, unique looking case. The only downside is that the only place for intake is the small triangle at the bottom of the front panel. I see that the spec alpha and the omega are pretty much the same, so I was wondering if it is possible to buy just the spec alpha's front panel and remove the large mesh. Then remove the tempered glass part from the front panel of the spec omega and replace it with the mesh from the alpha. http://www.corsair.com/us/en/Categories/Products/Cases/Carbide-Series-SPEC-OMEGA-RGB/p/CC-9011140-WW https://www.corsair.com/us/en/Categories/Products/Accessories-%7C-Parts/PC-Components/Cases/SPEC-ALPHA-Front-Fascia%2C-Black-and-Grey/p/CC-8930380 Link to comment Share on other sites More sharing options...
RiverM Posted March 23, 2019 Share Posted March 23, 2019 80mm exhaust fan where vertical gpu mount is on other cases? Very nice choice of case, love the looks. Link to comment Share on other sites More sharing options...
CanadianDro Posted August 30, 2020 Share Posted August 30, 2020 I also am looking to do the same with my Spec Omega (non rgb)... that front panel mesh would be perfect... is there a way to buy just the mesh? or even just the front panel? any luck? I see the link is the good for the just facia but not in stock :( Link to comment Share on other sites More sharing options...
Pocah Posted September 4, 2020 Share Posted September 4, 2020 I don't know the case but would it be possible to use the top as the intake instead? Link to comment Share on other sites More sharing options...
claybob Posted December 26, 2020 Share Posted December 26, 2020 I removed the front glass and panel. I also removed the top panel. I ordered some hex-mesh sheet metal to replace the glass and I intend to hot knife cut holes and install the screens over the holes. The limited air intake on this case is a serious design flaw and what looks like an extreme case of form over function. Link to comment Share on other sites More sharing options...
Joker28CR Posted March 10, 2021 Share Posted March 10, 2021 I have the black corsair spec omega rgb, and it's a really nice, unique looking case. The only downside is that the only place for intake is the small triangle at the bottom of the front panel. I see that the spec alpha and the omega are pretty much the same, so I was wondering if it is possible to buy just the spec alpha's front panel and remove the large mesh. Then remove the tempered glass part from the front panel of the spec omega and replace it with the mesh from the alpha. http://www.corsair.com/us/en/Categories/Products/Cases/Carbide-Series-SPEC-OMEGA-RGB/p/CC-9011140-WW https://www.corsair.com/us/en/Categories/Products/Accessories-%7C-Parts/PC-Components/Cases/SPEC-ALPHA-Front-Fascia%2C-Black-and-Grey/p/CC-8930380 Hi friend! At the end, did you remplace the glass front panel of the Spec Omega with the Spec Alpha's mesh one? I am having the same problem with the Spec Omega, which is beautiful but has an horrible airflow. I am thinking about getting a Spec Alpha front panel just to make that switch. Id really apreciate your help! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now