Cateran Posted November 21, 2015 Share Posted November 21, 2015 Hi @ all. I have the problem that my corsair link (3.2.5742) does not control my H80i GT everytime. After some systemstarts the programm is able to control the watercooling system (change the fan modus, show the RPM) and after some not. If not, every information coming from the H80 is freezed (temp RPM). After a full windows restart, its sometimes working, sometimes not :-( If corsair link is working ... after the windows sleep mode, its 100% not again. Thats anoying, because im using sleep mode very often. I reinstalled corsair link, used an other USB port on the mainboard. Every Fan Controll ability of my mainbaord is turned off. My system is windows 10 with all updates. Asus M5A87 AMD Phenom ii x6 1100t its anonying, because my system is overheating when corsair link is not working and i dont want to use the q-fan controll of my mainbaord. some ideas? Link to comment Share on other sites More sharing options...
Toasted Posted November 22, 2015 Share Posted November 22, 2015 Have you applied the registry fix for Windows? Did it help? Link to comment Share on other sites More sharing options...
Cateran Posted November 22, 2015 Author Share Posted November 22, 2015 no, because i did not find any of these regstry points ... i have only HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\USB\VID_1B1C&PID_0C02 and in this are no things like: DeviceSelectiveSuspended EnhancedPowerManagementEnabled SelectiveSuspendEndabled http://www2.pic-upload.de/thumb/28930165/1.jpg http://www2.pic-upload.de/thumb/28930169/2.jpg Link to comment Share on other sites More sharing options...
red-ray Posted November 23, 2015 Share Posted November 23, 2015 Have you applied the registry fix for Windows? Did it help? The H80i GT is a USB rather than a HID device so the registry fixes are not needed/possible. Link to comment Share on other sites More sharing options...
Cateran Posted November 23, 2015 Author Share Posted November 23, 2015 after aprox. 10 re-installations ... i know, that if my system is going to sleep mode only once, everything is broken until I uninstall everything and install it again. But also with a normal system reboot the H80i GT is often not recognized by corsair link :-( ... and i dont have the possibility to chnge this registry points. I dont have them. Link to comment Share on other sites More sharing options...
Hellstrike Posted December 17, 2015 Share Posted December 17, 2015 I'm having a similar problem with my H80i GT. Some times on restart it recognizes the fan, sometimes the pump, sometimes neither but never both. Have you found a solution to the problem? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.