" Dragon Desk" ( build in progress )

 

Hello guys, my name is Mark, and I live in Italy.

Excuse my English.

I am passionate about modding a few years, my passion are the Desk.

For almost six months I put in various dance projects , drawing the design with Solidworks, Corel, and DraftSight.

In the end neither left a desk all aluminum, with 3 mm thick, laser-cut , and with various robotic bending ..... all this made ​​at my expense .. in a laser cutting company in my area, I'm going to withdraw tomorrow afternoon .... and pay 530 Euro. :p:

Then they made a couple of changes will have various levels: holes and welding. I prefer to do a little hand , so I have to be fun for the next few months .... as a true modder should also get their hands dirty. :D:

 

Sponsored by

 

 

http://i59.tinypic.com/339h6q9.png

 

Special thanks goes to Umberto BitFenix ​​, for the trust you gave me in the project , for providing all the material. :D:

 

http://i61.tinypic.com/309sead.png

 

Special thanks goes to Jon ​​, for the trust you gave me in the project , for providing all the material. :D:

 

http://i58.tinypic.com/alruiq.jpg

 

Special thanks goes to Aquatuning Gmbh ​​, for the trust you gave me in the project , for providing all the material. :D:

 

http://i58.tinypic.com/2webclu.png

 

Special thanks goes to Lamptron​​, for the trust you gave me in the project , for providing all the material. :D:

 

 

 

http://i60.tinypic.com/muag51.jpg

 

 

Mb* Hoping to get a partnership

Cpu* Hoping to get a partnership

Ssd* n°2 - Corsair Force LX 512GB

HD* WD RE 4 TB Enterprise Hard Drive - WD4000FYYZ

Psu* Corsair HX750i

Gpu* Asus Strix - GeForce GTX 970, OC, 4 GB

Ram* 32GB - Corsair Dominator Platinum C9 1600MHz DRAM DDR3 da 16GB (4 x 8GB)

Keyboard* Corsair Vengeance K70 RGB Mechanical Gaming Keyboard — Cherry MX Red.

Rheobus1* n°2 - Lamptron CW611

Ventolame* n°12 - Spectre-pro White

Ventolame* n°2 - Corsair SP120 High Performance

 

http://i58.tinypic.com/2rx8hdt.jpg

 

 

Pump* n°2 - Alphacool VPP655 - PWM

Reservoir* n°2 - Phobya Balancer 250 black nickel

Radiator* n°2 - Alphacool NexXxoS XT45 Full Copper 360mm

Tube* Rigido e morbido Alphacool

Fittings* Alphacool Fittings

Gpu Block* Hoping to get a partnership

Cpu Block* Hoping to get a partnership

 

 

Material BitFenix

 

 

http://i61.tinypic.com/23kqg47.jpg

 

http://i58.tinypic.com/mx0i8y.jpg

 

http://i60.tinypic.com/21ep47a.jpg

 

http://i58.tinypic.com/260zz8n.jpg

 

http://i62.tinypic.com/21dloj9.jpg

 

http://i59.tinypic.com/10znwie.jpg

 

http://i58.tinypic.com/2i25xy.jpg

 

http://i57.tinypic.com/2i9pjig.jpg

 

http://i58.tinypic.com/2wfr2w8.jpg

 

http://i57.tinypic.com/33o06dc.jpg

 

http://i57.tinypic.com/dnbzno.jpg

 

 

Render:

 

http://i61.tinypic.com/3128fti.jpg

 

http://i57.tinypic.com/2ccxulz.jpg

 

http://i61.tinypic.com/2czu83a.jpg

Hi Bro!

Follow ;)

Ola Colonel... :D:

You have BitFenix PSU cables and no PSU?

Now I have a Seasonic P-660 Platinium, but I would change. :D:

I really like the idea of making a computer desk that also is a computer.

Something similiar will propably come If I move to a new apartment, my current apartment cannot reliable "take" such a solution.

 

But may I suggest a new name for it?

What about:

JOHNNY INTEGRATED DESK COMPUTER

 

(in the style of IKEA)

Hello guys , this morning I insert the aluminum components of the desk. :D:

 

A few photos of the work, made ​​by the owner of the company. ;):

 

http://i61.tinypic.com/r9fzh1.jpg

 

http://i57.tinypic.com/106ad7d.jpg

 

http://i62.tinypic.com/oqdf7c.jpg

 

Images: :laughing:

 

http://i60.tinypic.com/vsjqeu.jpg

 

http://i58.tinypic.com/11w3bxf.jpg

Here we are guys , with the first step, welding of aluminum :D:

 

http://i61.tinypic.com/20j358n.jpg

 

http://i61.tinypic.com/35cmlpy.jpg

 

http://i61.tinypic.com/20pzf5w.jpg

 

And now we wait for the rest of the welds :D:

Good heavens, I wish I had these type of skills and hardware. My tools consists of pliers, various screwdrivers and a hammer... T_T

Special thanks to Corsair, for sponsorship my project.

Thanks to Jon ;):

 

http://i62.tinypic.com/29sh6t.png

 

 

http://i61.tinypic.com/rvld8h.jpg

 

http://i57.tinypic.com/xgb608.jpg

 

http://i61.tinypic.com/308fa12.jpg

 

http://i61.tinypic.com/6efac2.jpg

 

http://i62.tinypic.com/w4s2d.jpg

 

http://i60.tinypic.com/30hof4g.jpg

 

http://i59.tinypic.com/y1cnn.jpg

 

http://i62.tinypic.com/ilysxu.jpg

 

http://i58.tinypic.com/29ff7o3.jpg

 

http://i58.tinypic.com/2po3777.jpg

 

http://i61.tinypic.com/2nsnscg.jpg

 

http://i61.tinypic.com/se4ora.jpg

 

http://i58.tinypic.com/e64lqv.jpg

 

http://i59.tinypic.com/rhpoom.jpg

 

http://i58.tinypic.com/ao6obc.jpg

 

http://i57.tinypic.com/97mmoy.jpg

 

http://i57.tinypic.com/bej32d.jpg

 

http://i59.tinypic.com/71tgfa.jpg

Thanks to Aquatuning Gmbh to sponsor my project Dragon Desk, and to Peter for collaboration. :D:

 

http://i58.tinypic.com/alruiq.jpg

 

 

http://i62.tinypic.com/vhxqvo.jpg

 

http://i57.tinypic.com/2d92xok.jpg

 

http://i62.tinypic.com/15r0ars.jpg

 

http://i60.tinypic.com/2nh3nuu.jpg

 

http://i58.tinypic.com/28vftwi.jpg

 

http://i60.tinypic.com/21bt0np.jpg

 

http://i60.tinypic.com/s11646.jpg

 

http://i57.tinypic.com/mhdkax.jpg

http://i60.tinypic.com/1zldjk4.jpg

 

http://i57.tinypic.com/34t6clz.jpg

 

http://i60.tinypic.com/hwi9fs.jpg

 

http://i62.tinypic.com/2vtxxg6.jpg

 

http://i59.tinypic.com/ay6r20.jpg

 

http://i57.tinypic.com/21m6nw1.jpg

 

http://i58.tinypic.com/10cur8y.jpg

 

http://i59.tinypic.com/29usg15.jpg

 

http://i62.tinypic.com/n4witd.jpg

 

http://i60.tinypic.com/wumfzp.jpg

 

http://i62.tinypic.com/33m6614.jpg

 

http://i59.tinypic.com/30mv9qd.jpg

 

http://i62.tinypic.com/fk1pvq.jpg

 

http://i60.tinypic.com/2pzmyyf.jpg

 

http://i60.tinypic.com/2rokh1v.jpg

 

http://i61.tinypic.com/2ags2kj.jpg

 

http://i61.tinypic.com/156fl0p.jpg

 

http://i58.tinypic.com/t71g79.jpg

 

http://i59.tinypic.com/9kaxzm.jpg

 

http://i59.tinypic.com/11j23pu.jpg

 

http://i58.tinypic.com/2m698pu.jpg

 

http://i62.tinypic.com/mkgbah.jpg

 

http://i60.tinypic.com/v8ftwm.jpg

Special thanks goes to Lamptron​​, for the trust you gave me in the project , for providing all the material. :D:

 

http://i58.tinypic.com/2webclu.png

 

 

http://i57.tinypic.com/29wuaea.jpg

 

http://i60.tinypic.com/nz3o3.jpg

 

http://i59.tinypic.com/20axs9u.jpg

 

http://i58.tinypic.com/15r07yx.jpg

 

http://i59.tinypic.com/2efniiq.jpg

 

http://i57.tinypic.com/2bu1i8.jpg

 

http://i62.tinypic.com/1zpl1tj.jpg

 

http://i62.tinypic.com/180kfd.jpg

Here we are guys... Today we start with the first cuts, after taking all measures perfect: :D:

I start from the plate that will accommodate the motherboard. ;):

 

I prepare my tools and start:: :D:

 

http://i60.tinypic.com/14kedmc.jpg

 

http://i62.tinypic.com/21kgy06.jpg

 

I start making some points on the parts to be drilled:

 

http://i59.tinypic.com/saw7f8.jpg

 

So with a cup 19mm, I start to make holes: :laughing:

 

http://i61.tinypic.com/29vckkw.jpg

 

http://i59.tinypic.com/x0pgmd.jpg

 

http://i57.tinypic.com/24wr62d.jpg

 

And here it is completely perforated: :p:

 

http://i59.tinypic.com/ot3t6w.jpg

Here it is over, after I helped out with the jigsaw, and files: :D:

 

http://i60.tinypic.com/10mra7o.jpg

 

http://i57.tinypic.com/am2icy.jpg

 

http://i58.tinypic.com/2zs40nt.jpg

 

Now that we have seen me do track the slab where I'll place the IO , cutting the compartment. ;):

 

http://i57.tinypic.com/ztyuj5.jpg

 

Putting in security , with glasses use the hose: :laughing:

 

http://i58.tinypic.com/2m26mo9.jpg

 

And here it is in position:

 

http://i60.tinypic.com/5zea6u.jpg

 

The signs you see on the left , are still to be determined .... :idea:

Hello guys I attach my test done today. :D:

 

Today, after 1,000 tests .... I start to write down and drill housings of the pump ( and also for a possible 2nd ) :D:

 

http://i57.tinypic.com/9rhef9.jpg

 

http://i59.tinypic.com/5foode.jpg

 

http://i61.tinypic.com/osew52.jpg

 

http://i58.tinypic.com/2mmfdoz.jpg

 

http://i57.tinypic.com/245jc4j.jpg

 

http://i61.tinypic.com/2eofxuq.jpg

 

http://i61.tinypic.com/1zm1sh4.jpg

 

 

............ :D:

Today I begin to make the rear holes of the radiators, where will waste 2 :: :D:

 

http://i61.tinypic.com/9qcy7l.jpg

 

Small and simple idea, to smooth the circles :: :D:

 

http://i58.tinypic.com/v66p9s.jpg

 

And finally mount the radiator ::

 

http://i59.tinypic.com/34gv70k.jpg

 

Now the two radiators are united, skipping the power supply, with rigid pipe, so I am created a template of the curvature :: :D:

 

http://i59.tinypic.com/jinq80.jpg

 

Now I connect them with its fittings ::

 

http://i58.tinypic.com/vg4z2r.jpg

 

http://i59.tinypic.com/2vsrtzt.jpg

 

http://i60.tinypic.com/2mwi4qq.jpg

 

............. :p: :p:

Hi guys :D:

 

Today it mounts the grids 360mm Phobya and since the 3 fans are distant 20mm from each other, I have to make holes :: :D:

 

http://i60.tinypic.com/2lvo31l.jpg

 

http://i58.tinypic.com/1z6wkqo.jpg

 

Now you have 2 buttons 25mm:: ;):

 

http://i58.tinypic.com/2zrlrue.jpg

 

http://i59.tinypic.com/m7w0f4.jpg

 

http://i59.tinypic.com/2ntzpl3.jpg

 

http://i59.tinypic.com/29qcy7q.jpg

 

http://i59.tinypic.com/2czc16s.jpg

 

 

................ :D:

congrats gas... and this Corsair Logo for K70 is cracking. can't wait to have one.

In the meantime a little sleeving... :D:

 

http://i59.tinypic.com/1z4vm6f.jpg

 

Now after taking exact measurements , start to make holes for the bulkhead :: ;):

 

http://i58.tinypic.com/2rq1469.jpg

 

http://i57.tinypic.com/2vttx60.jpg

 

http://i57.tinypic.com/es5gkk.jpg

 

Now step to the vertical panel of the mobo , even here the holes of the bulkhead , and the screen of the liquid temperature , and the window for Strix :: :biggrin: :biggrin: :biggrin:

 

http://i59.tinypic.com/2a6wj5y.jpg

 

http://i60.tinypic.com/11ry7br.jpg

 

 

..................... :D:

congrats gas... and this Corsair Logo for K70 is cracking. can't wait to have one.

 

The K70 is fantastic.. :D: :D:

Hello guys ... Today we start with a layout , to mesh power supply:: :D:

 

http://i58.tinypic.com/2zr3i2w.jpg

 

Once covered the area with the paper, proceed to give a nice pass from vinavil:: :p:

 

http://i58.tinypic.com/23swub7.jpg

 

So look 24H::* :mad:

 

http://i57.tinypic.com/dcd9on.jpg

 

Now that thelayout, it is hardened for good, proceed with the 1st pass, with a little bit::*

 

http://i57.tinypic.com/28v7iog.jpg

 

Then go climbing with the measures of the tips::* :D:

 

http://i59.tinypic.com/iz6zw4.jpg

 

Removed the burrs , it introduces itself:: :D

 

http://i61.tinypic.com/f1fr79.jpg

 

.................... :nodding:

Here we are, now a chore easy easy:** :greengrin

 

http://i59.tinypic.com/6prb5k.jpg

 

http://i58.tinypic.com/takhdz.jpg

 

Aluminum thread M 4X0,7

 

http://i57.tinypic.com/242ekjs.jpg

 

Allen Steel::* :naughty:

 

http://i57.tinypic.com/inrjb8.jpg

 

And finally fixed it all:**

 

http://i61.tinypic.com/huhue0.jpg

 

http://i62.tinypic.com/nbyjv4.jpg

 

http://i59.tinypic.com/9g8zcy.jpg

 

................. :D: