Socar32

Only the 3 stock fans LL120's dont seem to be picked up by the commander pro. The additional 2 LL120's i bought seperatly are the ones that are detected and can alter RPM on them. Please see pics: https://1drv.ms/f/s!Aprgdr_B6xo2sBOxEFeGSdLnkUcu Notice how fan 4 is stuck at 480 ish RPM and showing nearly full on the graph? The commander PRO is running off the same sata cable as 2 x SDD's. Could this be a problem with power? Although all the fans are running but 3 of them are running at lowest speed.

Yep thansk mate. I've done this numerous times still the same issue. Im starting to thinks its the 3 x stock fans with the case. But how the **** can it be 3 same PWM pins not be working???

No they are all the same black version LL 120. So i have just removed all the fan headers from the Commander PRO adn re put in them one by one. I found that the three original fans with the 465X Corsair case did you get picked up when installed in ports 1-5 on the CP. The 2 x serperate LL 120 fans i purchased did auto pickup in the ICUE software and let me control the RPM. Like i said they all power up with LEDS but something is stopping the stock Fans from being recognised in the software and letting me control their RPM.:mad::mad::mad::mad:

Yes its the one thats misbehaving. ALl fans are lit up and spinning ( 3 @ quiet speed , 2 @ balanced) but they are all set to balanced... All 4 pin connecters are fitted correctly into the CP. All RGB connectors are in the lightning node core which comes with the 465X case. All fans are 120MM LL RGB Fans. I have force updated firmware for the CP which is up to date. I have restarted all services and shut down all other monitoring apps/services.

https://1drv.ms/u/s!Aprgdr_B6xo2sAFGuDqu32i7hKCW?e=d3Cfqw

12 V is is showing 12.17V 3.3v is showing 3.36V. I have SATA cable using 2 x SDD and the Comannder PRO. Another powering the Nore Core and HDD. All headers and sockets are fitted correctly. USB lead fittid correctly into USB 2.0 on M/B. Just can t seem detect the other 2 fans and not letting me adjust 1 fan past 480RPM. (quiet)

Thanks for the reply... So You were correct in your statememt. The 3 that are showing (2 i cnage change between quiet,balanced and extreme) the other fan stays at 480 PRM but cant be changed. The other 2 fans arent showing. All are lit up and running. The only monitoring i am using is Afterburner MSI and AMS Ryzen Master but i have shut those down and still difference. nI have swapped all the fans headers between each port on the CP. Could it be a power issue. On the graph the 5V is showing max constantly on the graph...

Hello, I have set up my Comander Pro with 5 Corsair LL120 fans (brand new). All fan headers are in the the 4 pin headers and i have a Lighting node core connected to the USB port (9pin) of the commander pro. All fans are lit up and running. on the ICUE software only 3 fans are showing running with 1 of the fans set at 480 ish RPM and not going any higher after changing to extreme or balanced. All 5 ports are working on the commander pro as i have move header fan header between the five headers on the CP. For reason only 3 of 5 are showing up on the ICUE and 1 of them i cant changed the RPM. Please help!