PaulAm87

I have just got my iron claw wireless along with the HS70 pro wireless and K57 wireless, i have been having the same issues as in this thread, i have so far changed the dongle poling rate of the mouse in ICUE to 500Hz / 2msec and it appears to have made a difference. i have left the home page of Icue open while i have done some testing and noticed the mouse intermitantly disconnects and connects again which seems about right and the icon beside the mouse on device settings is sometimes a red On/off icon and other times a wireless icon, not sure if thats saying there is a disconnect or if something is losing power. weirdly its only the iron claw thats effected so i might try bring the dongle to the front of the PC or a port at the back that isn't near the other dongles. Update - since moving the dongle to the front USB on my PC it hasn't disconnected, so if yoiur still having trouble ask your self what is wireless at the back of the PC? does your motherboard have wireless?

Hi, So I have recently moved and my pc is now further from where I sit so need to work out a way to extend the cable , would it be better to extend using a USB cable extension or an audio extension cable such as - Headset Audio Extension Cable, 2m/ 78.74in 4 poles 3.5mm Female- Stereo Jack Cable Cord for Phones, Headphones, Speakers, Tablets and So On https://www.amazon.co.uk/dp/B07RRHFXJZ/ref=cm_sw_r_cp_apa_i_2fMbEb8GP2AJ2 Or AmazonBasics USB 3.0 A-Male to A-Female Extension Cable (2 m / 6.5 Feet) https://www.amazon.co.uk/dp/B00NH134L6/ref=cm_sw_r_cp_apa_i_GgMbEb0QE2BCV

It is, I looked for damage on the cable incase on was damaged but everything looks perfectly fine. Oh well will just need to save up for some 120 ML fans ... maybe get a bigger case too the meshify c I have was meant for a lot if the cabling lol

so after a dig around i found the SP buttons, got them hooked up and nothing at all :S looks like the fans are the issue?

I do, somewhere. i will look it out, hook it up and report back!

thanks, i have tried that and every time the SP's fail to light but the ML's are fine. i have even tried one SP fan connected to the RGB hub to see if i can get one to light up incase another had failed and go round the 3 i have but i get nothing. It's weird that all 3 have had there lights go at the same time but i think i have tried everything i can.

Thanks Zotty, Your right i meant the RGB Fan LED hub, i just couldn't get the name right in my head lol unfortunately not i have read through it and nothing has really stood out, i have created a diagram of my setup though. I have the one RGB Fan LED Hub on the same sata power lead as the H115i and the other RGB fan LED hub is on the same Sata power lead as the Commander pro. i have swapped the hubs about but no change, changed the cables that connect the hubs to the commander pro. changed the sata power lead combinations around and even had the hub that has the fans not lighting up on its own sata power lead but still i can't get the SP120's to light up.

Hi All, So i have recently upgraded my PC but kept my case, aio and fans but since then my SP fans have stopped working, i have read the forums and got a lot of tips of things to try but nothing seems to have worked for me so far and i'm a bit lost. So i have 2 ML 140's for the front of my case on my H115i aio - the fans PWM is attached to the connection on the H115i and the rgb connection is connected to the lightning node on ports 1 and 2 and attached to channel 1 on my commander pro. i then have 3 SP120's pwm connections go directly to the commander pro attached to ports 1,2 and 3 and the RGB connections connected to a second lighting node which is attached to channel 2 on the commander pro. the ML140's light up and and the SP120's don't, they have in the past but i can't see where the connections have changed during my upgrade. i have swapped the lighting nodes over changed the channel's and settings in Icue, i have tried different SATA power, unfortunately nothing has worked and my awful cable management feels like it has got worse. Has anyone got any suggestions on what else i could check?