Gr0u

I forgot to say, in my case I did all the suggested tests but the results were always negative, so the only solution was really RMA.

Hi colleague. My problem has already been solved. I contacted technical support. Technical support asked me to do some tests, maybe you can do the same tests. I suppose you have the latest version of the icue, try this: "- Please make sure to install all updates for Windows. - Uninstall the iCUE software. - Please locate your Appdata folder, and delete the 2 Corsair folders in the Local and Roaming folder. - Run CCleaner: https://www.piriform.com/ccleaner/download - Run CCleaner's Registry Cleaner - Restart your computer - Download and Reinstall http://downloads.corsair.com/Files/CUE/iCUESetup_3.18.77_release.msi" if the problem continues, try this connect your cooler temporarily to the outside of your case using a micro-USB to USB Type A cable and see if you can recreate the issue? if the problem persists it is best to request an RMA. In my case, they were very helpful and quick to answer me.

Log Files Maybe can help me

Hi, I recently had a problem with a bug in my windows where the only solution I was able to perform was to recover windows (I didn't format). When I installed the icue my cooler stopped responding to color profile changes, it just turned red. Already uninstalled the icue and the problem persists. The radiator fans respond well to the color profile change, I also have some other fans that were included in the omega box that also works. I have other corsair peripherals that also work well, just the core of the cpu that doesn't change color. sometimes the led works but after a short time it stops responding, turning only red. When I try to change to light colors (blue, green, orange, yellow, white and pink) the core remains red, if I change to dark colors the core changes

I tried to install the Corsair link and the software don't recognize the Water cooler hydro h100i

Hi, I recently had a problem with a bug in my windows where the only solution I was able to perform was to recover windows (I didn't format). When I installed the icue my cooler stopped responding to color profile changes, it just turned red. Already uninstalled the icue and the problem persists. The radiator fans respond well to the color profile change, I also have some other fans that were included in the omega box that also works. I have other corsair peripherals that also work well, just the core of the cpu that doesn't change color

https://www.dropbox.com/s/gjl5qdvx8bbyql8/Screenshot%202017-07-20%2017.14.02.png?dl=0 First install the version V4.8.0.82 and then unnistall Second i install the version V4.2.4.25, now i make the update for the version V4.8.0.82 and fine for me :p

https://www.dropbox.com/s/fjelhykqgyv0k11/Screenshot%202017-07-20%2016.59.46.png?dl=0 The old Version Sorry for repost, but i try install the new version....and it's good for me :p https://www.dropbox.com/s/x82ytnsryqxegq0/Screenshot%202017-07-20%2017.06.12.png?dl=0

I re-install the old version and it's fine. Maybe i wait for Corsair fix this issue, then i update the new version.

Hello Breene. Today I reported this problem to asus technical support. Unfortunately they did not give me any solution, they asked me to contact Corsair Support. Maybe the problem is the new Corsair Link https://www.dropbox.com/s/zfyssxed49e140e/Screenshot%202017-07-20%2016.08.23.png?dl=0

"Windows can not verify the digital signature for the drivers required for this device. A recent hardware or software change may have installed a file that is improperly or damagedly signed, or may constitute malicious software from an unknown source. (Code 52)"

Hello. I had to format my computer yesterday. After installing drivers for my motherboard (Asus Tuf z270 mark 1), I installed Intel ® Chipset Software Installation Utility driver V10.1.1.38 Intel ® Chipset Software Installation Utility V10.1.1.38 for Windows 7 32-bit & 64-bit, Windows 8.1 64-bit, Windows 10 64-bit (WHQL), after installing this driver started asking me Install a Driver (Corsair USBxp Driver) However in the program available corsair (corsair link) when opening the program, it does not recognize that I have installed on my computer HydroSeries H115i https://www.dropbox.com/s/s73r21ciwiyk48d/screen.png?dl=0