malazan Posted May 10, 2012 Share Posted May 10, 2012 Hi, 1. What are the four 2 pin connectors for? 2. I'm assuming the USB 3.0 connectors go outside the case and onto back of mobo? 3. There's a sata type connector that I don't know what to do with, it's one of the wider ones not one of the narrow ones you plug into a usual HD. Mobo ASUS MAXIMUX GENE V. Note: This is a new build in progress. Thanks, really like the case so far. :D: Link to comment Share on other sites More sharing options...
raidensix Posted May 10, 2012 Share Posted May 10, 2012 The USB connectors go to the back of case. You can also get an adapter if your motherboard has a USB3 connector. The SATA connector plugs into an SATA port on the motherboard. There should also be a corresponding SATA power connector for the power supply. This allows you to connect a hard drive using the top sliding panel. I think the 4-pin connectors you are referring to are for the fans. Link to comment Share on other sites More sharing options...
bwebmasta Posted May 10, 2012 Share Posted May 10, 2012 He is right, you may prefer to get the adapter for the USB 3.0 ports to plug them into the mobo header. Outside of the case looks..well goofy. Yes, those 4 pin connectors are for fans, if you want the controller on the case to run them. FrozenCPU makes one: http://www.frozencpu.com/products/13792/ele-932/FrozenCPU_USB_30_20-Pin_to_Dual_USB_30_External_Female_FCUC-01.html So does Silverstone: http://www.newegg.com/Product/Product.aspx?Item=N82E16812162012 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.