[Help setting up additional SP120 fan]

Well ... port #4 on the Lighting Node Core. And it is.

What happens if you swap the fans on Port 3 and Port 4?

Also, are you positive that you got SP-PRO and not plain SP-RGB? Can you verify the part number on the rear sticker of the fan?

 

The ebay post I bought it on listed it as a Pro, but I have now confirmed it is not. *facepalm*

 

Thank you so much for the help

[Help setting up additional SP120 fan]

Make sure that you plugged it into Port #4 on the fan hub.

 

Do I need a fan hub? The factory ones work with just the Node and Commander Pro.

 

Here's a picture of how everything is wired: https://imgur.com/a/MkK4Bdu

My iCUE: https://imgur.com/a/4DsW16v

My fans: https://imgur.com/a/FBeTpfq

[Help setting up additional SP120 fan]

I recently bought a 220T case that came with 3 SP120s and bought 1 more to go in the back of the case. This case came with a Lighting Node Core preinstalled with the fans already hooked up to ports 1-3.

 

I bought a Commander Pro as well and have the 3 factory fans plugged into 1-3 on both the Commander Pro and Node, and they all work fine. However, the additional fan (pin 4 in both the pro and node) that I bought will spin, but not light up. I initially thought the fan's LEDs were the problem, but I am now having the same issue with another fan.

 

My Node in iCUE is set to SP RGB PRO Series Fans, 4 Fans.

 

I've gone through the Support pages but could not find anything to help.

 

I've been messing with this for about two weeks and any help would be much appreciated.