[Xd5 pump control]

I am setting up a custom water loop using an xd5 pump ,finding it hard to find out if, what I want to do is run the pump pwm line from my strix rz5700xt fan header on GPU since I can set this to run off GPU temp and power the pump from the molex connection,a few I asked said it would draw too much power from the gpu I thought the pump draw was from molex and pwm line was for rpm and signal ,any help would be nice

[Push/pull on cooler]

Sound from cooler fans not an issue as one rig has 8 total fans second has 11 fans in case

[Corsair QL120 fan leds not working]

I put 6 ql's into my new build all work fine.i notice one off end fans shows pong reversed on fan LEDs but gate,infinity and rest show properly with fan in the same position

[Corsair QL120 fan leds not working]

Are fans plugged into 1,2,3 on controller

[Push/pull on cooler]

I was wondering if there would be any advantage of setting up push/pull on my h100i platinum,of two rig I built first has ll fans in push/pull,and new I put together has the ml fans that came from both

coolers

[Fans setup]

A quick question on rad set up upgraded to h100i platinum but used ll fans set up in pull/push on intake in front of case using top 2 of 3 fans bottom fan sngle.and 3 as exhaust 1back and 2 top.i did not use supplied ml fans and kept all 8 fans in case all ll fans(6 on rbg hub and the 2 pull fans off cooler fan control of the 6 speed controled off chassis 1 ,2 and cpu opt .my question will this work as well tho not using the supplied static pressure fans that came with cooler