[Latest ICUE System Hub Firmware]

23 hours ago, c-attack said:

 

Read the whole thread everyone, particularly the Corsair posts. You can try a simple reinstall, but anyone running devices on both channels is going to need to delete the configuration from the old scheme. 
 

There also is a linked page on the main site.

https://www.corsair.com/us/en/explorer/diy-builder/blogs/addressing-over-current-protection-issues-expanding-the-icue-link-system-hub-to-24-devices/

 

 

Hi All,

Please all give a big Thank you to c-attack

Following the link posted in the thread and installing the RevoUninstaller Free and using that to uninstall iCUE, followed by installing iCUE from scratch fixed the issue.

Please note though when I re-installed it kept all my profiles so my lighting setup and cooling was automatically set for me.

For me I can mark this problem as SOLVED!

[Latest ICUE System Hub Firmware]

As you can see below you should be able to change the speed

[Latest ICUE System Hub Firmware]

Just so you know, I did remove and reinstall and this did not fix the issue.

[Latest ICUE System Hub Firmware]

I have 7 QX RGB fans and after a firmware update, only 2 are registering in the Lighting section but all are available in the cooling.

They all still remember the hardware lighting that works until you log into the system but I can only change this for the two that are showing.

 

Come on guys sort this out.

[Corsair LL120 fans not lighting up]

I have not done anything with the hardware as this problem looks intermittent.

When I first opened iCUE I got the three problem ones lighting up but they were on a different scheme to the other fans, the mouse and the keyboard.

I had everything working 100% eventually yesterday after keeping iCUE open for a while.

This morning they again were not on but whilst writing this with iCUE open they have just come on and again not following the colour scheme as the rest.

 

I will update my system information as soon as I can.

 

Thank you for your help DevBiker

 

All on now following the colour scheme.

 

Specs updated

[Corsair LL120 fans not lighting up]

I have the problem where I have 5 LL fans, 3 120's and 2 140's.

I bought the 120's as a set of three and it came with the node, I purchased 2 additional 140's to add in. I set this all up around June and all worked fine but now 1 120 and 2 140's are not lighting up. I have updated iCUE and the firmware this morning but they are still not lighting up.

I briefly got them lit this morning messing about with profiles but after restarting they are off again, please help.