[Store black lighting effect to M55 device to work without iCUE running?]

So here's finally a definitive answer from Corsair:

Hello Andreas,

 

My apologies for the mistake. The M55 has no onboard memory and therefore cannot save lighting profiles directly. It is completely reliant on iCUE to tell it what to do and what to light up.

 

 

Regards,

<support-dude>

 

Which is really strange because it DOES store the changes to the DPI settings ON the device.

 

Anyhow, I found my own solution to the RGB problem (I'm just too old for colourful stuff) - see photo attached :D I'm sure you'll find that entertaining.

[Store black lighting effect to M55 device to work without iCUE running?]

Tried the firmware reset also already. Rather interesting. I'm in contact with the support, yes. They seem equally clueless :-D Thanks for trying to help! Much appreciated!

[Store black lighting effect to M55 device to work without iCUE running?]

Thanks again.

 

Nope, I don't have that. I only have "Create Folder", "Copy Profile", "Import/Export" (which is only from/into local files), "Delete Profile" (which is disabled for Default profile)

 

And nothing lese in the Profiles bar allows me to right click for a different context menu.

Tried soft reset and re-install of iCUE also.

[Store black lighting effect to M55 device to work without iCUE running?]

Tumbleweeds...? No idea? Nobody?

[Store black lighting effect to M55 device to work without iCUE running?]

Thanks for your response. Unfortunately, I don't have such a profile in my list. I installed the iCUE software after I first plugged in the mouse. But I assume that shouldn't be a problem, right?

I've tried a reboot and re-plugging it also, without any improvement.

Is there a reset of the software and device I could/should try?

 

I've attached my view of the software with the profiles. Anything else I should provide for troubleshooting?

[Store black lighting effect to M55 device to work without iCUE running?]

Hi,

I've connected my new M55 to iCUE 3.18.77 and I'd like to save a black lighting effect profile to the device as the default so it keeps that colour scheme even when iCUE is not running.

I can't seem to find the buttons to load/store the profile to the device.

Any help? Do I need an older version of the software to do that? If so, is there an official corsair link I could use?

 

Thanks a lot!

meph