SiD-P
-
Posts
22 -
Joined
-
Days Won
1
Content Type
Forums
Gallery
Release Notes
Corsair Blog
Store
Profiles
Posts posted by SiD-P
-
-
Hmm ... so there was something amiss with the other cable.
But the temps are still wonky? Can you post a screen cap again?
I've installed this CoPro in to another system, gave me the same phantom Temp readings on #3 & #4 and low volts on the 3.3v rail
the problem is definitely with the CoPro.
-
What is the value on the 3.3V rail after adding the extra SATA cable?
the new value is 3.33v
-
Do you have the CoPro on an adapter of some kind, perhaps a Molex to SATA adapter?
Look at the 3.3V rail on that CoPro - it's not getting any power.
No, it's directly connected to the PSU, I'll add an extra SATA power connector to the PSU.
Thank you for pointing that out to me.
EDIT: Added an extra SATA cable to the PSU.
The issue with the temp phantom sensors still remains
-
Okay, so just installed a brand new Commander Pro (old one died for some reason).
The new Commander Pro controls 6 fans
Issue I'm having is that temp sensors #3 & #4 are reporting a temperature although there are no sensors attached to the ports.
see here outlined in red:
When I do connect a temp sensor to these two ports, the temp reading is incorrect. Temp sesor ports #1 & #2 work without issue.
What the hell is going on???
-
Make sure you have gone to Settings in the iCUE software, Dashboard, and that the Storage Drive Widget is enabled.
Thank you, that worked for me.
I don't know how I could have missed it.
On another item. I have been running 2 Commander Pros. One of them has seeming stopped working. No longer visible in iCUE and the light on ComPro does not come on at all (even during boot). The fans connected to the ComPro are no longer spinning as well. Is this a dead ComPro?
-
Okay so upgraded to iCUE 4 the other day & all seemed fine. I then noticed Dashboard items and Home screen sensor items would disappear every time I boot up the system in the morning.
Uninstalled, did a fresh clean install. Seems to have fixed Dashboard/Home sensor issue, but now my SSDs are not showing up on Dashboard & there is no option to add them back in. (Samsung NVMe SSD).
What's up with that?
-
Thank you guys for this.
Was having the very same issue. I deleted the widgetsMetaData file and problem solved.
- 2
Introducing the new CORSAIR iCUE (v4.X) - Megathread
in CORSAIR iCUE
Posted