[Will the CLNP + CLCP control any 5V WS2812B addressable 5050 RGB LED Strip]

oh wow thats cool, ill have to count but would it be easier to allow the end user to type in the amount per string?

[Will the CLNP + CLCP control any 5V WS2812B addressable 5050 RGB LED Strip]

correct i cut off the last 5 leds to make it fit. due to the options in SIV the last 3 in my current setup arnt being used. ill probably end up in software upping the length so it will think its longer, but should still look ok

[Will the CLNP + CLCP control any 5V WS2812B addressable 5050 RGB LED Strip]

i didnt split it physically, i had to cut 5 diodes off the end and then in the software i added it as RGB 10 LED Items x5 so teh led effects act as though there are separate strips.

 

not my desired setup, i want white with red phasing through it but it works for now

[Will the CLNP + CLCP control any 5V WS2812B addressable 5050 RGB LED Strip]

all finished and works great. Really neat how you can break the strip into smaller stips in the software

[Will the CLNP + CLCP control any 5V WS2812B addressable 5050 RGB LED Strip]

thanks.

the arrow is on the plug it appears to be vdc

[Will the CLNP + CLCP control any 5V WS2812B addressable 5050 RGB LED Strip]

thanks but left to right with no reference means nothing

 

all the wires are black, one of them has a stripe on it which changes position on the 2 cables

 

from everything you said im guessing looking at the wire vdc is the arrow,then data then gnd?

[Will the CLNP + CLCP control any 5V WS2812B addressable 5050 RGB LED Strip]

ordered a strip to try this out. making the connections right now. im going to use the cable from the three button controller. You said the middle was green (data) which one is gnd, power?

 

on the connector there is an arrow which one is that?