[Will the CLNP + CLCP control any 5V WS2812B addressable 5050 RGB LED Strip]

I was looking at the specifications of the strip and it was specified that it was GRB and not RGB, so before buying it I wanted to be sure that it was okay

[Will the CLNP + CLCP control any 5V WS2812B addressable 5050 RGB LED Strip]

Ah ok, I misunderstood, but eventually I use the cables that I already have and I change them so I do not change much where I take the power

 

For the tip for Italy I would spend a lot of disputation with even the risk of customs :-(

 

I was looking though that the strips I found have the WS2812b controller but they are not RGB GRBs, are they okay?

[Will the CLNP + CLCP control any 5V WS2812B addressable 5050 RGB LED Strip]

Ok, so you say that I can power 90 LEDs using a single channel without causing damage?

 

In the end if only the LPN dies and it does not damage me anymore then it is not a problem to recall as much as I have another one :-)

 

Unfortunately as I said I'm Italian so I can not take the cables already made as those who linked me the ebay shop :-(

[Will the CLNP + CLCP control any 5V WS2812B addressable 5050 RGB LED Strip]

Right, so now I try, but in theory it should not change anything if I get in touch with the sata instead of the LNP.

 

The important thing is that I understood how to connect everything then I do some tests.

 

So the led limit is always 96 has not been increased?

[Will the CLNP + CLCP control any 5V WS2812B addressable 5050 RGB LED Strip]

THB what would it be?

I used the sata to be sure of the amps, because it would be more convenient to use the LPN

[Will the CLNP + CLCP control any 5V WS2812B addressable 5050 RGB LED Strip]

You have +5V and ground reversed on the NoPro.

What are you planning on hooking up to the LNP for control? How many LEDs?

 

 

is this correct?

 

we connect 3M of strip which is 90 LEDs

 

 

I will never thank you enough for all the help you are giving me

[Will the CLNP + CLCP control any 5V WS2812B addressable 5050 RGB LED Strip]

Here I am, I have not had much time lately

So let's see if I understand the connections well.

The Data connects it in the red of the LED strip connector that calls Input

And then the + and the - I take it from a molex to get enough A

 

I made a scheme to understand better

[Will the CLNP + CLCP control any 5V WS2812B addressable 5050 RGB LED Strip]

Ok, I understand that for the 90 LEDs I want to connect I have to set 6 LL fans and that the power I have to take from a sata or molex.

 

What I miss is how to make the connections to the strip

[Will the CLNP + CLCP control any 5V WS2812B addressable 5050 RGB LED Strip]

Why can not I take it from a sata or molex?

 

But the links I said would be fine?

[Will the CLNP + CLCP control any 5V WS2812B addressable 5050 RGB LED Strip]

Have you left me? :rofl:

[Will the CLNP + CLCP control any 5V WS2812B addressable 5050 RGB LED Strip]

I'm beginning to understand.

So if I want to put a 6-meter strip that has 90led and the total consumption of 18watt I absorb 3.6A that I could take from a sata or molex?

 

Then the red and white strip cable is to give it power

 

instead the green and red comdani how do I connect them to the LNP?

[Will the CLNP + CLCP control any 5V WS2812B addressable 5050 RGB LED Strip]

So this is LPN

 

These are the LED strip cables

 

How should I make the connections that I did not understand anything?: Thinking:

 

I would like to cover 3m of desk, I can also make two strips of 1.5m to not be overloaded, but unfortunately I did not understand how I should do exactly

[Will the CLNP + CLCP control any 5V WS2812B addressable 5050 RGB LED Strip]

I do not absolutely blame corsair for the closed system, even after it has released icue has surpassed the other producers to unimaginable levels given the comfort and the ecosystem.

it's just a shame to have so much potential but to be limited, I speak from the power of two completely corsair stations and would return to buy a thousand more times, I was only sorry for the big limit.

 

I am willing to try, I cable with links and everything, but I struggle to understand how to connect the wires, then I know that exaggerating with the A breakers and circuitry break, but if I could also put the strip on writing was too beautiful.

 

Thank you so much again for all the help you are giving me

[Will the CLNP + CLCP control any 5V WS2812B addressable 5050 RGB LED Strip]

What a mess, corsair had fun doing a closed system :-(

 

If it became too impossible I took two kits of strips only then I can use only 6 so even there it is not convenient.

 

Given the unified system and the software done so well it is really a pity that you can not easily connect non-proprietary strips.

 

Can I feed them externally and use only the LNP to control the colors?

The limit of 2.1A is for sinoglo connector sin or in total of the two?

[Will the CLNP + CLCP control any 5V WS2812B addressable 5050 RGB LED Strip]

For this I ask you, to be helped because they are able to make the welds connections but here I did not understand how to connect everything.

 

So I understand now how the thing of the maximum controllable LED works.

 

Ok so ineria configuring as LL fans I can do it.

 

Now I have a commander pro, with a connected 3x ML120 PRO and 4 corsair strips, so if I connect an additional LNP, can I control 90LED if I set up as LL fans?

[Will the CLNP + CLCP control any 5V WS2812B addressable 5050 RGB LED Strip]

Specify these values: 9.0 W / m 0.3 W / LED

 

Are they ok even if GRB instead of RGB?

 

these would be: http://www.btf-lighting.com/productshow.asp?ArticleID=0&id=155&cid=001

 

Thank you so much for the immense help you are giving me

[Will the CLNP + CLCP control any 5V WS2812B addressable 5050 RGB LED Strip]

Maybe I did not specify that the picture I took from previous posts.

 

I wanted to connect a strip of 3M for a total of 90led 5050, with a connection as in the picture I can or burn everything for too many A?

[Will the CLNP + CLCP control any 5V WS2812B addressable 5050 RGB LED Strip]

It's at the bottom of the RGB FAQ - the link is in my signature. Look for "Advanced Corsair RGB Setups".

 

Found, I looked a bit the various explanations but does not speak to connect the normal led strips.

 

Reading the previous posts I realized that there is a limit of LEDs due to the Amps and the maximum number of LEDs controllable, what are the exact limits of both?

 

Then just connect the two wires as in the picture to make the LEDs go?

[Will the CLNP + CLCP control any 5V WS2812B addressable 5050 RGB LED Strip]

Sorry but I can not find any Zotty's diagrams on the RGB FAQ

 

is it in this thread?

[Will the CLNP + CLCP control any 5V WS2812B addressable 5050 RGB LED Strip]

I like the external LND very much.

 

So after I have to feed the strip with a 5V power supply and the LND takes power from the usb if I understand correctly.

 

Is there a picture or a diagram where I can understand how to colleagle everything?

 

So can I take any strisia addressable?

 

 

Thank you very much for your help

[Will the CLNP + CLCP control any 5V WS2812B addressable 5050 RGB LED Strip]

I looked a bit and I did not understand very much, also because I do not Italian so I can hardly understand everything.

 

I saw the photos of the links in the previous place but I did not understand if I have to take an external power if I wanted to put a stricia of 3 meters.

 

In other words, how do I need to connect the cables if I buy an inexpensive addressable strip on Amazon?

[Will the CLNP + CLCP control any 5V WS2812B addressable 5050 RGB LED Strip]

Yes ... and as long as you keep the current limitations in mind.

 

What would be the limitations?

 

Because I would like to put a strip across the desk so I can command it from the icue software but I would almost always keep it one color, would it be possible?

[Will the CLNP + CLCP control any 5V WS2812B addressable 5050 RGB LED Strip]

So if I understood correctly is it possible to connect any addressable led strip do I make the right connections?