Schar07 Posted September 23, 2017 Share Posted September 23, 2017 I know it is a common headache, but i tried everything. AX860i does not show up in latest CL. W7 x64 + i7 4770k + Asus M6F Z87. H80i + AX860i, PS is connected through H80i block. SIVx64 sees both fine. Device Manager shows no Corsair Integrated USB bridge (HID/USB) devices, but it shows both VID_1B1CXXXXXXX USB Input and HID-compliant devices as generic/unbranded and OK. In Control Panel Programs and Features i have both Corsair LINK 4 and Windows Driver Package - Corsair Components, Inc. (SIUSBXP) USB (07/14/2010 3.3) items. PS was seen with older releases, probably up to 1y ago, i did not notice exactly when it disappeared. Sometimes updating CL was breaking things up but uninstall + manual cleaning + reinstall worked fine...now doesn't. I already removed CL with full manual cleaning of folders and registry keys - including those requiring SYSTEM permissions to be deleted. I have seen the AXi PSU Drivers red-rey was posting, but they don't install through the INF file right click neither through Device Manager, as i have no yellow keys to apply them neither does the HW scan find any new devices for the AXi. How can i load them? Any further ideas before throwing this crappy software into the bin? Thanks! Link to comment Share on other sites More sharing options...
red-ray Posted September 23, 2017 Share Posted September 23, 2017 As your AX860i is connected via the H80i C-Link port then all the posts I made about the SIUSBXP driver don't apply. This driver is only used when the Corsair Link AXi PSU USB Dongle is used to connect AXi PSUs. SIV reports your AX860i so the hardware is fine and CL4 should also report it :nodding:, but I have no real idea as to why CL4:!oops: fails. I suggest you log a call via https://support.corsair.com/ and ask Corsair to fix their software :rant2:, remember to upload your original invoice. As no fans are connected to the H80i I guess you must be using the motherboard to control them, are you? Assuming so I guess you have no real need to use CL4. Looking at your http://forum.corsair.com/forums/showthread.php?p=903638 post my guess is that things went wonky in CL 4.7.0.77. I would be inclined to try CL 4.6.0.86 with the CPUIDSDK.dll from CL 4.8.3.8. Link to comment Share on other sites More sharing options...
Schar07 Posted September 24, 2017 Author Share Posted September 24, 2017 Thanks RR, Ticket opened:shootme: Yes, H80i two fans are connected to mobo CPU headers and controlled by Asus AI Suite 3 Fan Xpert 2. BTW, i also closed AI SUite 3 and retested LINK, but no PSU yet. Reason to use link was mainly to see wattage absorption and trending more easily. Plus, i hate the idea that Corsair software doesn't work with 2 of their own pieces of HW... come on!:nono: And,,,well, thanks, i forgot i made the analysis and post in May! Actually i do confirm it. And thanks, i'll give CPUIDSDK.dll trick a shot. Thank you and regards Link to comment Share on other sites More sharing options...
Schar07 Posted September 24, 2017 Author Share Posted September 24, 2017 RR, v4.6.0.86 with CPUIDSDK x86 and x64 DLLs from 4.8.3.8 is almost working! Only two 220mm slow speed chassis fans #1 and #3 are off (actually they were shutdown while screenshooting - temp controlled by Asus AI Suite), but i can now see MOBO + CPU + SSDs + GPUs + DRAMs + H80i + AX860i! Link to comment Share on other sites More sharing options...
red-ray Posted September 25, 2017 Share Posted September 25, 2017 temp controlled by Asus AI Suite Don't use SIV if you have ASUS AI Suite active!, see http://forum.corsair.com/forums/showthread.php?t=141037 There are many posts about ASUS AI Suite + CL4 "not getting along" and I advise against trying to do this. Link to comment Share on other sites More sharing options...
Schar07 Posted September 27, 2017 Author Share Posted September 27, 2017 OK, actually exiting both AI Suite and AIDA64 shows correct chassis fans values in LINK. I'll decide what to leverage moving fwd, but thanks for the Dll trick. PS: no news from Corsair yet Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.