cgentil Posted August 28, 2015 Share Posted August 28, 2015 Hi, I got my H80i GT and installed Corsair Link, but Corsair Link can't detect H80i GT. I've a exclamation on device manager and code 28 (drivers fault). What can I do? Thank you. Link to comment Share on other sites More sharing options...
red-ray Posted August 28, 2015 Share Posted August 28, 2015 I've a exclamation on device manager and code 28 (drivers fault). Use device manager to update the driver. I found this by doing https://www.google.com/?gws_rd=ssl#q=device+manager+and+code+28 Link to comment Share on other sites More sharing options...
cgentil Posted August 28, 2015 Author Share Posted August 28, 2015 Hello. How? I tried but it says can't locate any software driver.... Thank you. Link to comment Share on other sites More sharing options...
red-ray Posted August 28, 2015 Share Posted August 28, 2015 Have you installed CL 3.2.5695? When you install it the drivers should get installed. There are a couple of popups you need to approve. You also need to add your PC Specs to your profile as this makes it easier/possible to help you. Do you have the following three Corsair items listed? Link to comment Share on other sites More sharing options...
cgentil Posted August 28, 2015 Author Share Posted August 28, 2015 I just have installed Corsair Link. Can you list the order and what I must install? I will complete my profile as soon as possible. Thank you. Link to comment Share on other sites More sharing options...
cgentil Posted August 28, 2015 Author Share Posted August 28, 2015 Have you installed CL 3.2.5695? When you install it the drivers should get installed. There are a couple of popups you need to approve. You also need to add your PC Specs to your profile as this makes it easier/possible to help you. Do you have the following three Corsair items listed? I only get Corsair Link Link to comment Share on other sites More sharing options...
red-ray Posted August 28, 2015 Share Posted August 28, 2015 I only get Corsair Link Uninstall CL and then re-install. Make sure you do run as admin. Link to comment Share on other sites More sharing options...
cgentil Posted August 28, 2015 Author Share Posted August 28, 2015 Uninstall CL and then re-install. Make sure you do run as admin. Still nothing Link to comment Share on other sites More sharing options...
cgentil Posted August 28, 2015 Author Share Posted August 28, 2015 Windows is detecting the Cooler but Corsair Link don't. Link to comment Share on other sites More sharing options...
cgentil Posted August 29, 2015 Author Share Posted August 29, 2015 What can I do? I tried every single thing. Look: Link to comment Share on other sites More sharing options...
red-ray Posted August 29, 2015 Share Posted August 29, 2015 What is listed on Programs and Features? Post a screen shot. Does C:\Program Files (x86)\Silabs\MCU\USBXpress2\ exist? Is so you could try installing the driver from there. You still need to add your PC specs to your profile. Link to comment Share on other sites More sharing options...
cgentil Posted August 29, 2015 Author Share Posted August 29, 2015 No. But I tried to install CL 3.2.5676 and it appeared! With CL 3.2.5695 anything seems to be missing on installer. I think. Link to comment Share on other sites More sharing options...
Killville Posted August 29, 2015 Share Posted August 29, 2015 Hi, I got my H80i GT and installed Corsair Link, but Corsair Link can't detect H80i GT. I've a exclamation on device manager and code 28 (drivers fault). What can I do? Thank you. Hi, tried uninstalling in safe mode and always reboot in safe mode and reinstalled CL. Link to comment Share on other sites More sharing options...
cgentil Posted August 29, 2015 Author Share Posted August 29, 2015 Now all is working. How can I update firmware or see my fw version? Link to comment Share on other sites More sharing options...
red-ray Posted August 29, 2015 Share Posted August 29, 2015 tried uninstalling in safe mode and always reboot in safe mode and reinstalled CL. No. He has not even installed the driver yet! Link to comment Share on other sites More sharing options...
red-ray Posted August 29, 2015 Share Posted August 29, 2015 How can I update firmware or see my fw version? Good. The firmware on the H80iGT cannot be updated using CL. Look at the [Options] devices panel. My H80iGT is 2.3.0.0. Link to comment Share on other sites More sharing options...
Killville Posted August 29, 2015 Share Posted August 29, 2015 No. He has not even installed the driver yet! You infuse science dude ! I had the same problem as him, that's why I suggested this because for me it has run. Link to comment Share on other sites More sharing options...
cgentil Posted August 29, 2015 Author Share Posted August 29, 2015 No. He has not even installed the driver yet! Red-Ray all is installed now. My doubt now is how do I check my firmware version and how do I update it? Link to comment Share on other sites More sharing options...
cgentil Posted August 29, 2015 Author Share Posted August 29, 2015 Good. The firmware on the H80iGT cannot be updated using CL. Look at the [Options] devices panel. My H80iGT is 2.3.0.0. Mine is 2.3.0.0. It's same, it's the latest one right? Link to comment Share on other sites More sharing options...
red-ray Posted August 29, 2015 Share Posted August 29, 2015 Mine is 2.3.0.0. It's same, it's the latest one right? I don't know, but suspect 2.3.0.0 is the latest. Link to comment Share on other sites More sharing options...
cgentil Posted August 29, 2015 Author Share Posted August 29, 2015 Many thanks. Topic solved. Link to comment Share on other sites More sharing options...
MisplacedTexan Posted October 8, 2015 Share Posted October 8, 2015 What is listed on Programs and Features? Post a screen shot. Does C:\Program Files (x86)\Silabs\MCU\USBXpress2\ exist? Is so you could try installing the driver from there. You still need to add your PC specs to your profile. So I'm bumping this back up because it almost solved my problem. When I first installed the H80iGT it worked. Had a profile setup and everything. Went to adjust the profile about a week ago and I couldn't get the pump or fan to come up in CL. The pumps LED still show the color I changed it to originally, and they run...but I can't adjust speeds anymore, or monitor. I tried installing the driver from this folder, and was hit with an 'unsigned driver' error. Any idea on a work around for that? Link to comment Share on other sites More sharing options...
MisplacedTexan Posted October 9, 2015 Share Posted October 9, 2015 well for anyone that cares, I rolled back to window 7 and everything works just fine again. So much for windows 10 support. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.