Evolution294 Posted April 26, 2020 Share Posted April 26, 2020 system specs in profile. this is a newly built PC everything is working fine. all drivers are up to date, and software is all up to date. the problem i have is with the Commander Pro...i pretty much have mostly corsair products in my rig, and the last piece of the puzzle was getting all my LL120 fans working, which they are. the problem lies in the commander pro, where it intermittently shuts off and back on again. i have rewired everything, uninstalled all the ICUE software and reinstalled them back and forced firmware,this problem still persist. is there any way that the commander pro's firmware be updated or rewritten to work properly? I'm sure there are more enthusiast out there with this issue? i can post a video upon request. thanks in advance Link to comment Share on other sites More sharing options...
usna92 Posted April 28, 2020 Share Posted April 28, 2020 You can do a forced firmware install from iCue to the CoPro, but I would double check the USB 2.0 connection first to make sure the cable is not loose. Link to comment Share on other sites More sharing options...
Evolution294 Posted April 28, 2020 Author Share Posted April 28, 2020 You can do a forced firmware install from iCUE to the CoPro, but I would double check the USB 2.0 connection first to make sure the cable is not loose. all that was done several times...rewired the entire build and forced firmware Link to comment Share on other sites More sharing options...
Recommended Posts