Holley Posted April 25, 2004 Share Posted April 25, 2004 System specs: 3.4 P4EE with MCW-478-UHT Waterblock and 226W peltier Radeon 9800XT 256MB DDR With MCW50-T Water block and 80W peltier Meanwell 320W Peltier power supply 465W Enermax system power supply Abit IC7-MAX3 motherboard. 2XWD Raptors 740 74gb, 8MB,10,000rpm, SATA Setup in raid-0 Lite-On DVD Drive 16X DVD, 48X Read Plextor DVD ReWriter (PX-708A) SoundBlaster Audigy 2ZS Platinum Pro 7.1 External Lian Li PC71 Case with a Large Rad and 2 120MM cooling fans. As you can see there was no expense spared here, I want to use this setup for extreme overclocking and hardcaore gaming. Mostly for games like Far-Cry and the up and comming Doom3. I checked your ram guide but it recommended pc-4400, I was looking at getting your TwinX-4000pro series 1024 kit, what would you suggest for my setup? Also I learned that doom3 will need 2GB of memory to run it's best, How is this going to work on duel channel boards? :eek: Link to comment Share on other sites More sharing options...
CandyKid Posted April 25, 2004 Share Posted April 25, 2004 Welcome to the forums, Holley! If you're going to be going for extreme OC's, then definately get some PC4000 or PC4400 DDR memory, such kits as: TwinX1024-4000PRO TwinX1024-4400 (No PRO model yet) Unfortunately, there's not yet a 2048 kit for anything above PC3200 (TwinX2048-3200). If you're still sure you want 2Gb of memory, you can buy two matched sets and run four modules, but it might limit the amount of overclocking you can do before you start to become unstable. As for those requirements, I believe they are: Minimum: CPU: 800 MHZ - 1 GHZ GeForce 3 TI/ATi 9600 Pro RAM: 256 MB RAM Standard: CPU: 1.7GHZ-2GHZ GeForce 4 TI 4400/4600/ATi 9700/Pro RAM: 512 MB RAM Optimal: CPU: 2.5 GHZ - 2.8 GHZ GeForce 5800FX/5900FX/ATi 9800 Pro RAM: 768-1024 MB RAM . PLUR CK Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.