Finally Finished

Granted this is my first time with a custom loop so I understand not all of my pipes are straight or completely round, it took a lot to get to this point, so I am just happy it works.

System Specs:

Intel i7 8700K @ 5.0Ghz 1.39 VCore

Asus Maximus X Hero

16 GB Corsair Vengeance RGB DDR4-3000

2 x Corsair Force LS 120 GB SSD

2 x Corsair Force GT 120 GB SSD

1 x Hitachi 2 TB Storage

XFX RX 570

3 x Corsair Lighting Node Pro (20 Total LED Strips in System/Desk)

3 x Corsair LL120 Fans w/Corsair Controller

3 x EKWB Vardar EVO Fans

No Name Fan Hub

EKWB Custom Loop

3D Printed Top Mount for Radiator

3D Printed Case Feet

3D Printed Controller Shelves

I am hoping that the next time I have to tear this down I will be able to either make better hard tube bends or even move back to soft tubes as they were much easier to work with.

I do have a small problem with the one of the Corsair Fans, I will try to get a video of it, however, on the first boot each day i get some really crazy flickering/strobing/jumping around the rim Rainbow effect. It also seems as though the system loses connection with one of the Corsair devices as it makes the disconnected sound at every start up. Who knows. I am just happy the system is up and running for the most part.