Sniper3001 Posted June 23, 2017 Share Posted June 23, 2017 Hi guys. So I just hooked up a Corsair Commander Pro. There are 3 HD140 RGB fans hooked up along with 2 ML140 Pro fans hooked up to it as well (fans for H115i water cooler). The problem i'm having is that all the fans keep jumping in speed. For example...they will all set at around 600rpm then out of no where they jump to 1500rpm (loud), sit there for about 10 sec....then drop back down to 600rpm. This keeps repeating....seems worse when I play a game. I have tried to set all fans to either 1) quiet 2) balance 3) performance. It's pretty much the same on all these settings. I didn't have this problem until I install Corsair Link. Anyone have any ideas? Also installed a USB2.0 case fan cable for usb cases outside of the case on the commander pro. Doesn't work though. Link to comment Share on other sites More sharing options...
red-ray Posted June 23, 2017 Share Posted June 23, 2017 At a guess you should change the group from the CPU Temp to the H115i temp. Post the screen shots showing the fan config panels. Link to comment Share on other sites More sharing options...
Spyer231 Posted June 25, 2017 Share Posted June 25, 2017 At a guess you should change the group from the CPU Temp to the H115i temp. Post the screen shots showing the fan config panels. Yes I had this same issue and changing the group in Corsair link from the CPU package to the H115i pump package fixed it right away. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.