pharrell Posted July 21, 2011 Share Posted July 21, 2011 Hi, I'm having trouble installing GT series SSD on my EVGA mainboard. I update my bios and my Marvell (SATA III Chip) to the lasest driver. I also enable to AHCI mode in my bios, and also exchange the cable to the new SATA III the shortest one (10cm). I also check the SSD's firmware is 1.2. However,every time when I was trying to install the OS on the SATA III channel, it either crash or keeps rebooting. I also install everything by SATA II port on my board. Everything works fine, but when i try to switch to the SATA III port . It comes with the same result( crashing or freeze ) Any suggestion ?? Thank you Motherboard EVGA Classified 3 P/N 141-GT-E770-A1 Processor Intel Core i7 975 Memory (part number) CORSAIR DOMINATOR 24GB CMP24GX3M6A1600C9 Video Card # 1 EVGA GTX 590 Video Card # 2 N/A Video Card # 3 N/A Hard Drive # 1 Corsair 120gb Force GT Link to comment Share on other sites More sharing options...
ssdx3 Posted July 21, 2011 Share Posted July 21, 2011 Marvell SATAIII chip is a disaster. I'm not overly surprised that you are having issues. I would say to trouble shoot further try a different SATAIII port. Keep it on ICH10R you will get better performance. The Marvell 9128 chip has many issues that I have experienced first hand with my SSD's. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.