shankly1985 Posted February 25, 2014 Share Posted February 25, 2014 First of Nice new Forum change I like :D Ok anyone here know what size Hard-drive 3.5 cage will fit in the back of this case? or know of a better way of mounting two 3.5 drives? I guess above the PSU will be the best place. Thanks Link to comment Share on other sites More sharing options...
wytnyt Posted February 25, 2014 Share Posted February 25, 2014 i dont think any 3.5 drive cage will fit on the 540 chamber side as theres exactly enough width to horizontally fit a 3.5 drive... Link to comment Share on other sites More sharing options...
sativas Posted February 25, 2014 Share Posted February 25, 2014 There have been a few mods done to fit drives in the backside, Here is one of them involving hotswap bays mounted below the 5.25" bays which could look really clean. http://www.overclock.net/t/1404897/official-corsair-carbide-air-540-owners-club-gallery/5300_100#post_21837836 Another one I don't feel like searching for uses a cage mounted above the PSU. Link to comment Share on other sites More sharing options...
wytnyt Posted February 25, 2014 Share Posted February 25, 2014 There have been a few mods done to fit drives in the backside, Here is one of them involving hotswap bays mounted below the 5.25" bays which could look really clean. http://www.overclock.net/t/1404897/official-corsair-carbide-air-540-owners-club-gallery/5300_100#post_21837836 Another one I don't feel like searching for uses a cage mounted above the PSU. doing at that location only creates a slew of problems from then on with the wiring as theres virtually no room at all for it.. above the psu is the best place but that nixes the ssd cage Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.