boeing253 Posted January 17, 2017 Share Posted January 17, 2017 Hi there. After a number of years dreading removing and cleaning the radiator on my H80i, I did some searching and saw a trick on a youtube video where you insert to normal fan screws in diagonal corners to hold the fan in place whIle I attached the long fan screws into the radiator and then removed the 2 screws holding the fan in place originally and replace with the long screws again. This works very well as I have the 780T case and the rear fan mounts are designed so you can slide the fan up and down so makes installation somewhat tricky coz it's moving. I just wanted to see if any other users have tried doing this because it takes the hassle out of holding the heavy radiator and trying to keep the fan in place. I'm sure people know this but it works really well instead of trying to hold the first fan in place aswell as radiator while you attach the fan to back of case (or wherever you mount it) and then you just have to hold radiator. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.