madsci72 Posted January 21, 2004 Share Posted January 21, 2004 I just got this motherboard to replace and damaged one but unable to get it to post with the memory in duel mode if the system is overclocked at all. If I do not overclock then it will run in duel mode just fine. Or, if I run the memory in single mode I can over clock NP and run it @ 200mhz. I have tried several different timings and have no luck overclocking. On a few timings I was able to get into windows only to have it lock up just after loading. Any idea what I need to do to get the memory to work with the MB and still overclock? Link to comment Share on other sites More sharing options...
agontijo Posted January 21, 2004 Share Posted January 21, 2004 Try to set the AGP/PCI rate to a fixed value, the lowest possible (67/33 MHz). Don't forget to raise the voltage to the memory, try 2.8v, it's more stable and accept better values for timings and over. And try combinations for the PAT, begin with the Slow, than try FAST, Turbo, and if sucessful, try ULTRA-TURBO! See this, may help. [url]http://www.houseofhelp.com/forums/showthread.php?s=&postid=100273[/url] Regards, AleX Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.