Any help appreciated with Commander mini manual/installation instructions

Where can I download the full manual for the corsair c-link commander mini.

The full detailed instructions not just the quick start guide.

 

I am attempting to set up the C-link commander mini and have run in to a few difficulties.

 

The system I am attempting to set up is.

 

Mainboard: GIGABYTE GA-970A-UD3P

Processor: AMD FX 8320

PSU: CORSAIR RM 750

RAM: 16GB Kingston HYPER X (4X4GB)

Cooling: CORSAIR H55 + Corsair Airflow memory cooler

C-link: CORSAIR Commander mini

Graphics: Dual XFX 7870 DD Crossfire

Case: CORSAIR Graphite series 780T White

OS: WINDOWS 7 64

 

Any help or advice anyone could offer would be greatly appreciated.

 

Thank you

The only document is http://www.corsair.com/~/media/corsair/download-files/manuals/link/commanderminiqsg_eng.pdf

 

You should only post PC specs when the question is about a different PC

The thing I am having trouble with us connecting the RM750 PSU to the commander mini via the C-link port on the PSU, I have the cable and digital bridge, but do I plug both the main unit and the PSU to the mainboard via USB headers. If so will the PSU connect to the commander via the main board?

The thing I am having trouble with us connecting the RM750 PSU to the commander mini via the C-link port on the PSU, I have the cable and digital bridge, but do I plug both the main unit and the PSU to the mainboard via USB headers. If so will the PSU connect to the commander via the main board?

 

 

Is it really an RM750 or an RM750i? Only the RM750i has a C-Link connection.

 

See http://forum.corsair.com/forums/showthread.php?p=759585 if you don't have enough motherboard USB 2.0 headers.

Yes it's an RM750 and it has the C-link port

Yes it's an RM750 and it has the C-link port

 

If it's am RM750 then it does not have a C-Link port ! As I specified only the RM750i has a C-Link port :!:.

 

See http://www.corsair.com/en-us/blog/2013/september/rm_series_psu_to_corsair_link

 

This is silly it's labelled C-Link but the C-Link connection is not a C-Link Digital port :brick:

Do that link says that it is. C-link port but I need the digital bridge which I have, my question is do I have to plug both the USB connection on the command unit in to a USB header of my main board, in addition to connecting the PSU via the digital bridge USB connection to another USB header on my main board. Will this connect the PSU to the commander via the mainboard or do I need to connect the PSU directly to the commander somehow?

1. To say the least the description in the link is rather confusing, I advise you to ignore it.
   
2. The RM PSU Bridge and CL Mini are totally disjoint.
   
3. Both need to be connected to a USB Header.
   
4. Once both are connected software should be able to see them both.
   
5. Check what Devices and Printers reports.
   
6. Do you have enough USB headers?

Thank you Ray, I have looked everywhere on the corsair site and online in general and found no info at all, the corsair instructions are extremely unclear and basic.

the corsair instructions are extremely unclear and basic.

 

Not only that some of the installation guides are actually incorrect!, see http://forum.corsair.com/forums/showthread.php?p=901674

 

Do you now know enough to get it installed? Good luck and let us know when it's all working.