Montdj Posted June 3, 2015 Share Posted June 3, 2015 Hello Everyone!! This is my first build log here. I hope all will enjoy and please input is always encouraged. I will be using some of the parts from a recent build but most will be bought new. Here are a couple pics from that. http://i171.photobucket.com/albums/u311/montdj/Project%20Outta%20Control/IMG_0305_zpsvpqhcrie.jpg http://i171.photobucket.com/albums/u311/montdj/Project%20Outta%20Control/IMG_0313_zpsvihnybwp.jpg This build I am going to be using the 900D case and full water cooling. I have been wanting to use this case for a full water cooling build since I first seen it a couple years ago. Anyway here is the parts list so far. Case: Corsair 900D CPU Intel i7 4790k MB Asus Z97 Maximus VII Formula Ram 32GB Corsair Dominator Platinum 2400MHz GPU EVGA 980GTX x2 SSD TBD PSU TBD Think AX1200I but running out of money fast I know some of you are going why Z97 and not a X99 setup well a couple reasons. First I am waiting for the new chips in a couple months. Second I already have the chip and last well price right now. Trying to fit alot of things into my budget. I have also orders a couple of Coldzeros plates for the 900D. I think I will be going with a white a black theme with this one. Not sure yet but will decide soon Here is the water cooling gear: Pump EK pump\res combo with a 250mm tube. GPU Blocks EK-FC980 x2 CPU Block EK Supremacy MX Rad #1 EK CoolStream XTC 420 Rad #2 EK CoolStream XTX 480 The rest is a mix of bitspower and monsoon fitting and monsoon ridged pipe. Well here is a couple pics of the case. http://i171.photobucket.com/albums/u311/montdj/Project%20Outta%20Control/IMG_0317_zpsyewljdiw.jpg http://i171.photobucket.com/albums/u311/montdj/Project%20Outta%20Control/IMG_0318_zpsoia5muoj.jpg http://i171.photobucket.com/albums/u311/montdj/Project%20Outta%20Control/IMG_0319_zpsf7hgkrnp.jpg Link to comment Share on other sites More sharing options...
Montdj Posted June 3, 2015 Author Share Posted June 3, 2015 Well made a little progress last night. Got the case stripped down and starting painting some parts. Should be getting the motherboard and misc things today. Well on with the pics. Full view of the case http://i171.photobucket.com/albums/u311/montdj/Project%20Outta%20Control/IMG_0339_zpsdoqfsnny.jpg Inside view. http://i171.photobucket.com/albums/u311/montdj/Project%20Outta%20Control/IMG_0342_zpsvkbqf0fo.jpg http://i171.photobucket.com/albums/u311/montdj/Project%20Outta%20Control/IMG_0341_zpsypxunakl.jpg The start of the painting http://i171.photobucket.com/albums/u311/montdj/Project%20Outta%20Control/IMG_0324_zpsonh20bdu.jpg http://i171.photobucket.com/albums/u311/montdj/Project%20Outta%20Control/IMG_0323_zpskgl6urnz.jpg http://i171.photobucket.com/albums/u311/montdj/Project%20Outta%20Control/IMG_0330_zpsihamdfhd.jpg http://i171.photobucket.com/albums/u311/montdj/Project%20Outta%20Control/IMG_0332_zpsm0htpczt.jpg and a pile of some of the parts http://i171.photobucket.com/albums/u311/montdj/Project%20Outta%20Control/IMG_0343_zpsl8uoco2a.jpg Link to comment Share on other sites More sharing options...
Montdj Posted June 15, 2015 Author Share Posted June 15, 2015 Sorry it's been a while since I updated this thread. Work has kept me pretty busy and most of the progress has been late at night. Well have got a lot done working on it here and there. Got the plates from ColdZero and that was the last of the parts I needed. Started to bend tubing and didnt like the way the Monsoon ends were fitting. I ended up ordering Bitspower fittings for everything, Also ended up going with 10mm/12mm pipe. Well here are the pics with everything up to date. Let me know what you all think. http://i171.photobucket.com/albums/u311/montdj/Project%20Outta%20Control/IMG_0347_zpsz4uzulpa.jpg Needed to make a extension for the 2 ssd http://i171.photobucket.com/albums/u311/montdj/Project%20Outta%20Control/IMG_0353_zps0j34wq5r.jpg Here it is all complete http://i171.photobucket.com/albums/u311/montdj/Project%20Outta%20Control/IMG_0356_zpsymgcflq2.jpg Needed a place to mount the HD. http://i171.photobucket.com/albums/u311/montdj/Project%20Outta%20Control/IMG_0354_zpsr39cgiby.jpg Starting to see the wat everything will fit together http://i171.photobucket.com/albums/u311/montdj/Project%20Outta%20Control/IMG_0214_zpshqvfkjvt.jpg Right before I decide to switch to bitspower fittings http://i171.photobucket.com/albums/u311/montdj/Project%20Outta%20Control/IMG_0385_zpsm9ta8oqk.jpg Some plumbing and starting to leak test http://i171.photobucket.com/albums/u311/montdj/Project%20Outta%20Control/IMG_0392_zpswngjkufj.jpg A better view of where the HD is mounted I have done the final fill last night and finished wiring it today. Everything has turned out the way I was hoping. I will be posting more pics of the final build later tonight or tomorrow. Thanks for Looking. Montdj Link to comment Share on other sites More sharing options...
Montdj Posted June 15, 2015 Author Share Posted June 15, 2015 Here is a quick one of the completed build. http://i171.photobucket.com/albums/u311/montdj/Project%20Outta%20Control/IMG_0417_zpsifau6j0l.jpg Link to comment Share on other sites More sharing options...
Trophy Posted June 15, 2015 Share Posted June 15, 2015 Looks amazing, really clean with the more simple backplate, SSD placement and colorscheme. Good job :D Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.