Search the Community
Showing results for tags 'no boot'.
Found 2 results
-
I am having an issue when I boot my computer that iCue starts but fails to recognize my keyboard (K68). if i reach around back, unplug and plug the USB for it it will immediately recognize it, and load my profile. I have the most up to date Firmware and Software. It used to only do it occasionally, but as of late, its been every boot. I also had an issue where the profile I created would actually freeze my computer every now and then. I had it set so if the keyboard was idle for 15 seconds, the LEDs would fade out, and would come back on if a key was pressed. Changing it back to on all the time solved the freezing issue.. Keyboard works fine otherwise.. And I have totally uninstalled and reinstalled iCue Thanks in advance -Iggy
-
Specs: Mobo: Gigabyte H110M-DS2 DDR4 CPU: I3 6100 GPU: GIGABYTE 1660 AORUS 6 GB Current old RAM:Hyper x FURY 8GBX1 And lets start with the problem :laughing: So i bought a corsair value select 16 GBx1 2400 mhz CMV16GX4M1A2400C16 and it arrived yesterday. First move was just to take of the old RAM kit and in its place, place the new one. Wich i did and after the power up pc wouldnt boot and not only that but it also kept BSOD the whole time. For the following hours i tried the folloing: Updated BIOS to last F24 version of November 18 Cleaned with a rubber the pins of the new RAM Cleared CMOS with a screwdriver Selected option on BIOS for WIN10/8 MEMTEST freezes at 8% on the new RAM switched both ram slots on mobo Nothing worked, i am typing with the old ram on Any ideas? Cause after 72 euro in Greece my last option is to resell it
