Search the Community
Showing results for tags 'k70 error'.
Found 3 results
-
Hello all, help would be greatly appreciated. I'm suddenly getting an error message with my K70 MK.2 in icue 3.33.246, Fist error - "Device is no longer detected or there was an issue with deleting the profile. Please reconnect your device and try again". did all that, same error followed by the below - Error message "There is an error detected with your device's onboard profiles. One or more profiles are corrupted or undetectable. The profiles affected will be delted from your onboard storage and will need to be resaved again". After that I went to the keyboard to save a profile, Onboard profiles are all empty, hit save to slot 1, doesnt like it, causes it to bring the first error message up again.... Any clues anyone?
-
Hello there, I have a k70 mk2 rgb se. I have had it less than a year and two of my keys are slightly discolored, I'm not sure if it's a software thing or if one colored LED is broken or dimmed for some reason. I would show a photo but it is impossible to see it in a photo. If anyone has any advice whether it be a software fix or if it's possible to replace the LEDS individually that would be fantastic, thanks!
-
Hello all. I received this keyboard as a gift recently for my birthday and i have had it from the time of making this post for no more than 3 days, and in those 3 days i have had more issues with this keyboard than i ever have with my K66 (never had one by the way). I did some minor research and it seems like this keyboard is prone to issues and some people have even had the same problems that i am having currently. To begin with when i received this keyboard and first plugged it in to my USB 3.0 port on my pc is gave me the following error (https://gyazo.com/cfd531c488acb7dd5de6a0e38bace320). This was my first issue however this seems to have dissipated by itself (not 100% sure). After hopefully solving this issue my next issue is that whenever i plug the keyboard into multiple ports being 2.0 and 3.0 it does 1 of 2 things every time. The first option it does it light up, the RGB turns on and copys the default rainbow spiral pattern that it comes with for about 3 seconds and then stops and freezes on whatever the pattern was on, the keyboard then looses all functionality in typing and media keys, everything is frozen. I then get a red exclamation point encased inside a red triangle as well in the iCUE software on the bottom right hand corner of the keyboard logo. The second option is that whenever i plug it into the port it does nothing, it does not light up, does not function, nothing. It's like no power is going to it. (Sometimes the profile and brightness keys light up) but that is about it for the second option. I can sometimes get it to work for about a minute to two minutes but then it reverts back to option one and completely freezes on me. I've searched vigorously across Youtube, Corsair forums and the internet. Every solution or recommendation people have said i have done, changed my USB Media settings to false, re installed the iCUE software updated everything on my computer and nothing still works. The only thing that gets me close to it being fixed is uninstalling the iCUE software which makes me thing its either something to do with the driver that the software is installing to my pc or its the keyboard drivers itself, i could be wrong i am no expert. When i have the software uninstalled the keyboard works for 3/4 minutes then reverts back to the option one i stated earlier. I have contacted the support and made a ticket and they told me to do the following: Please follow the directions below: 1: Unplug your keyboard from the computer. 2: Locate the small pinhole underneath your keyboard. For some, this will be located near the polling rate switch by the cable. On others, it will be located underneath on the tilt legs on the bottom of the keyboard. 3: Using a small paperclip or push-pin, press down on the button inside the pinhole. 4: Plug your mouse back into the computer, while holding down the pinhole button. 5: Once it is plugged back in, your computer should recognize a drive called CRP_Disabled. Please open this. 6: Download the firmware file from the ticket. If it is compressed into a .RAR file, please extract this file to an easily found location on the computer. 7: Delete the file FIRMWARE.BIN from the CRP_DISABLED drive, and then place the file with ISP in it’s name to the CRP_Disabled drive. 8: Once you have performed the steps above, please unplug your keyboard and then plug it back in. The device will then return to normal. Please test to see if the issue reappears. If it does, please inform us on the ticket for further troubleshooting. I have followed this step by step but whenever i plug the keyboard into my PC there is no pop up what so ever that comes up with the CRP_DISABLED drive. So i can not test or try this solution. If anybody knows a way i could navigate to it manually i would appreciate it. Now corsair support being what it is i really do not have the time or patience to wait 3 days at a time for a small reply. I paid $100 for this keyboard and i would like to return it if i can not get a fix so as you can imagine my time in returning it is running out. I really don't want to send it back as i love this keyboard and corsair is defiantly one of my favourite keyboard producers however i do not want a dysfunctional keyboard so if anybody has any suggestions at all id be forever grateful. Thanks for reading, Trikz.
