surject Posted February 17, 2017 Share Posted February 17, 2017 - Keyboard LEDs light up at power on - keys don't work though in POST (BIOS, System Password etc.) - USB Legacy is activated - Different USB Ports (2.0 and 3.0) tested - Usual Dell USB keyboard works without problems (!!) - BIOS Switch not existing on this keyboard anymore - Polling Rate lowered to 8ms didn't help - Keyboard Firmware and BIOS up to date. Motherboard: Asus P8P67 Deluxe. Any help appreciated. Thanks. Link to comment Share on other sites More sharing options...
Toasted Posted February 18, 2017 Share Posted February 18, 2017 To enter BIOS mode on the K95 Platinum, Press F1 followed by the Windows lock key, Link to comment Share on other sites More sharing options...
surject Posted February 19, 2017 Author Share Posted February 19, 2017 Hey thanks for that hint, but how do you know this? Is there a manual anywhere? :) Do I press that key combination when powering on my computer and the keyboards LED light up? And will that setting be permanent or just until CUE is being loaded in Windows (with another polling rate set in there) ? Or is there a way to switch to 1ms again with another keycombo? So many questions :) Thanks! Link to comment Share on other sites More sharing options...
Toasted Posted February 19, 2017 Share Posted February 19, 2017 It is the "standard" (Has not changed for years) combination for Corsair keyboards that do not have the polling switch at the front of the keyboard When BIOS mode is enabled, It will always stay enabled until you disable it by doing the same key combination which would revert back to the normal polling rates. You would want to enable BIOS mode before shutting down as its unlikely you'll enable it as POST would have somewhat be halfway/completed by the time its enabled. Link to comment Share on other sites More sharing options...
surject Posted February 20, 2017 Author Share Posted February 20, 2017 Great. Will try it out and report. Thanks! Link to comment Share on other sites More sharing options...
surject Posted February 25, 2017 Author Share Posted February 25, 2017 Hello again, just wanted to thank you again. It works flawlessly now with your hint. I can even switch to BIOS mode only after reboot/power-on when it's asking the System Password - perfect. I switch it back while Windows is loading/resuming. Problem solved! :) Link to comment Share on other sites More sharing options...
Checktaschu Posted October 2, 2018 Share Posted October 2, 2018 I didnt even know about a bios mode for keyboards until i accidentally hit the key combination today, you guys saved me, thx alot for this thread. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.