The Corsair User Forums  

Go Back   The Corsair User Forums > Corsair Product Discussion > Solid State Drives (SSD)

Notices

Reply
 
Thread Tools Search this Thread Rating: Thread Rating: 11 votes, 5.00 average. Display Modes
  #1  
Old 09-30-2010, 02:34 PM
Glaucous Glaucous is offline
Registered User
Glaucous's PC Specs
 
Join Date: Sep 2010
Posts: 5
POST ID # = 469013
Glaucous Reputation: 10
Default Is my SSD F60 failing?

After reading a few stickies I see that reading the SMART isn't always reliable, so I thought I'd need some input here.

Device Model: Corsair CSSD-F60GB2
Serial Number: 10336518580009990133
Firmware Version: 1.1


I bought Corsair SSD F60 today, installed Ubuntu 10.04 x64 on it and went on and everything seemed to be working great. But after a while I got this:
"DISK IS BEING USED OUTSIDE DESIGN PARAMETERS", and said that my disk was failing.

This is the SMART status output:
Code:
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   102   102   050    Pre-fail  Always       -       5065649
  5 Reallocated_Sector_Ct   0x0033   096   096   003    Pre-fail  Always       -       384
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       86234353369091
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       14
171 Unknown_Attribute       0x0000   000   000   000    Old_age   Offline  FAILING_NOW 0
172 Unknown_Attribute       0x0000   000   000   000    Old_age   Offline  FAILING_NOW 0
174 Unknown_Attribute       0x0030   000   000   000    Old_age   Offline  FAILING_NOW 11
177 Unknown_Attribute       0x0000   000   000   000    Old_age   Offline  FAILING_NOW 0
177 Unknown_Attribute       <== Data Page      |  WARNING: PREVIOUS ATTRIBUTE HAS TWO
181 Unknown_Attribute       <== Threshold Page |  INCONSISTENT IDENTITIES IN THE DATA
181 Unknown_Attribute       0x0000   000   000   000    Old_age   Offline  FAILING_NOW 0
181 Unknown_Attribute       <== Data Page      |  WARNING: PREVIOUS ATTRIBUTE HAS TWO
182 Unknown_Attribute       <== Threshold Page |  INCONSISTENT IDENTITIES IN THE DATA
182 Unknown_Attribute       0x0000   000   000   000    Old_age   Offline  FAILING_NOW 0
182 Unknown_Attribute       <== Data Page      |  WARNING: PREVIOUS ATTRIBUTE HAS TWO
187 Reported_Uncorrect      <== Threshold Page |  INCONSISTENT IDENTITIES IN THE DATA
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
187 Reported_Uncorrect      <== Data Page      |  WARNING: PREVIOUS ATTRIBUTE HAS TWO
194 Temperature_Celsius     <== Threshold Page |  INCONSISTENT IDENTITIES IN THE DATA
194 Temperature_Celsius     0x0022   025   036   000    Old_age   Always       -       25 (Lifetime Min/Max 0/36)
194 Temperature_Celsius     <== Data Page      |  WARNING: PREVIOUS ATTRIBUTE HAS TWO
195 Hardware_ECC_Recovered  <== Threshold Page |  INCONSISTENT IDENTITIES IN THE DATA
195 Hardware_ECC_Recovered  0x001c   102   102   003    Old_age   Offline      -       5065649
195 Hardware_ECC_Recovered  <== Data Page      |  WARNING: PREVIOUS ATTRIBUTE HAS TWO
196 Reallocated_Event_Count <== Threshold Page |  INCONSISTENT IDENTITIES IN THE DATA
196 Reallocated_Event_Count 0x0033   100   100   010    Pre-fail  Always       -       0
196 Reallocated_Event_Count <== Data Page      |  WARNING: PREVIOUS ATTRIBUTE HAS TWO
231 Temperature_Celsius     <== Threshold Page |  INCONSISTENT IDENTITIES IN THE DATA
231 Temperature_Celsius     0x0013   093   093   000    Pre-fail  Always       -       1
231 Temperature_Celsius     <== Data Page      |  WARNING: PREVIOUS ATTRIBUTE HAS TWO
233 Unknown_Attribute       <== Threshold Page |  INCONSISTENT IDENTITIES IN THE DATA
233 Unknown_Attribute       0x0000   000   000   000    Old_age   Offline  FAILING_NOW 128
233 Unknown_Attribute       <== Data Page      |  WARNING: PREVIOUS ATTRIBUTE HAS TWO
234 Unknown_Attribute       <== Threshold Page |  INCONSISTENT IDENTITIES IN THE DATA
234 Unknown_Attribute       0x0000   000   000   000    Old_age   Offline  FAILING_NOW 192
234 Unknown_Attribute       <== Data Page      |  WARNING: PREVIOUS ATTRIBUTE HAS TWO
241 Unknown_Attribute       <== Threshold Page |  INCONSISTENT IDENTITIES IN THE DATA
241 Unknown_Attribute       0x0032   000   000   000    Old_age   Always   FAILING_NOW 192
241 Unknown_Attribute       <== Data Page      |  WARNING: PREVIOUS ATTRIBUTE HAS TWO
242 Unknown_Attribute       <== Threshold Page |  INCONSISTENT IDENTITIES IN THE DATA
242 Unknown_Attribute       0x0032   000   000   000    Old_age   Always   FAILING_NOW 128
242 Unknown_Attribute       <== Data Page      |  WARNING: PREVIOUS ATTRIBUTE HAS TWO
  0 Unknown_Attribute       <== Threshold Page |  INCONSISTENT IDENTITIES IN THE DATA

Error SMART Error Log Read failed
Smartctl: SMART Error Log Read Failed
Error SMART Error Self-Test Log Read failed
Smartctl: SMART Self Test Log Read Failed
SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Because of all the Unknown Attributes I thought this wasn't too reliable, so I booted Windows 6 x64 and ran CrystalDiskInfo.
I'm sorry that I forgot to change the language of it before uploading, but the important parts are still in English.



Does this look good or bad? 93% doesn't tell me too much, since the drive hasn't been used more then 3 hours.
Reply With Quote


  #2  
Old 09-30-2010, 03:55 PM
Niczo Niczo is offline
Registered User
Niczo's PC Specs
 
Join Date: Sep 2010
Posts: 3
POST ID # = 469020
Niczo Reputation: 10
Default

I've seen alot of similar reports from a range of SSDs, even new ones. People keep asking why their brand new SSDs show a health status of below 100%. There's a sticky on the issues of SMART reporting and SSDs, It's right at the top of the page. Should help clear things out for you.
Reply With Quote


  #3  
Old 09-30-2010, 04:00 PM
Glaucous Glaucous is offline
Registered User
Glaucous's PC Specs
 
Join Date: Sep 2010
Posts: 5
POST ID # = 469021
Glaucous Reputation: 10
Default

Yes I read it, just wanted to make sure. I guess I can ignore the Ubuntu error for now.
Otherwise the performance (on Linux at least, will need to configure Windows) is really good, and no noticeable problems.
Reply With Quote


  #4  
Old 09-30-2010, 05:28 PM
krazyatom krazyatom is offline
Registered User
krazyatom's PC Specs
 
Join Date: Sep 2010
Posts: 41
POST ID # = 469030
krazyatom Reputation: 10
Default

Mine F60 is 96%.
Reply With Quote


  #5  
Old 09-30-2010, 05:57 PM
Glaucous Glaucous is offline
Registered User
Glaucous's PC Specs
 
Join Date: Sep 2010
Posts: 5
POST ID # = 469033
Glaucous Reputation: 10
Default

I probably won't think too much about it as long as it doesn't drop (a lot) more.
Reply With Quote


  #6  
Old 10-01-2010, 05:29 AM
mark501 mark501 is offline
Registered User
mark501's PC Specs
 
Join Date: Sep 2010
Posts: 8
POST ID # = 469099
mark501 Reputation: 10
Default

For the record: CrystalDisk info page for my new F60 says the exact same thing 93% Bra :)
Reply With Quote


  #7  
Old 10-01-2010, 06:26 AM
Glaucous Glaucous is offline
Registered User
Glaucous's PC Specs
 
Join Date: Sep 2010
Posts: 5
POST ID # = 469103
Glaucous Reputation: 10
Default

That actually makes me glad. :)
Reply With Quote


  #8  
Old 10-05-2010, 04:46 PM
RAM GUY's Avatar
RAM GUY RAM GUY is offline
Corsair Product Guru
 
Join Date: Apr 2001
Location: Fremont, CA
Posts: 118,268
POST ID # = 469894
RAM GUY Reputation: 10
Default

This Sticky should explain that!
Interpreting SMART Data on Corsair Force Series SSDs
__________________
Support accounts and tickets can be created at https://support.corsair.com.
Reply With Quote


Reply

Tags
f60, linux, smart, ssd, status

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:54 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.