SOLVED - Save Profile to Device

[vichu]

Recently I brought the K70 RGB MK.2. I can't find save profile to device on iCUE. Thought Keyboard is defective.
After little research, hope I found the solution.
It is not about the iCUE or hardware issue.
I'm running
iCUE Version 3.15.101
Keyboard Firmware Version 3.24

WE NEED TO SOFT-RESET THE KEYBOARD


Follow these steps to Soft Reset the Keyboard

1. Quit iCUE
2. Unplug the keyboard
3. With the keyboard unplugged, hold down the ESC key.
4. While holding down the ESC key, plug the keyboard back into the computer.
5. After about 20 seconds, release the ESC key.
6. If done correctly, your keyboard's lighting will flash.

For the K95 RGB Platinum, this process is slightly different:

1. Quit iCUE
2. Unplug the keyboard
3. With the keyboard unplugged, hold down the ESC key.
4. While holding down the ESC key, plug the keyboard back into the computer.
5. Hold the key down until the keyboard begins to flash.
6. Unplug the keyboard and plug it back in.

Official Link to Keyboard Soft-Reset
Official Link to Mouse Soft-Reset

Issues:

1. You cant export or copy the Default Profile to Onboard Memory. You need to Select one of the Onboard Memory Profile (HW1, HW2, HW3) and select Lightening effect.
2. Only 5 custom or 1 predefined lightening effects can be created for Hardware Profiles.

NOTE: I don't have K95 RGB or Corsair Mouse to check this method. If anyone have K95 RGB or Corsair Mouse, try this method and comment on this thread

[potateorno]

Didn't work for K70 RGB