Jump to content
Corsair Community

ram issues


sebringsc

Recommended Posts

I just purchased a set of TWINX1024-3200C2PT from newegg and the damn things won't post when I change the timings to 2-3-3-6 or anything else, they basically only post w/ the default 3-3-3-8. Also when I check them w/ everest, it says that the module name is CMX512-3200C2. Is this the right name for this memory?

It also seems that when I try to OC the FSB past 225 MHz they won't post even when I drop the LTD/FSB multiplier to something low like 3 or 4. My CPU idles @ 20C running @ 2350 MHz & 210 FSB but I feel as though this ram should DEFINETLY go past 225 FSB

My specs are in my sig so any help would be greatly appreciated

Link to comment
Share on other sites

ok i got those setting to work this morning and now i'm messing around w/ increasing the bus speed to max my mhz. I'm also trying to use some dividers but when I use the dividers my ram registers slower, like PC2700 instead of PC3200...not sure if that is a good thing to max the CPU's power.

 

Any Suggestions on using the dividers?

 

Steve

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...