SoxmisUK Posted June 23, 2019 Share Posted June 23, 2019 Wish I had never invested a considerable small fortune in this mouse. Cable unplugged, the mouse falls asleep after approx 2 minutes and there is a pregnant pause before it wakes of about 2-3 seconds every time, it is so very, very annoying when you expect it to be just alive when you touch it. Sometimes moving it is not enough it needs a click from a button to wake it, sometimes i have to plug the cable in, sometimes I have to use the little reset hole under the mouse to get it to function at all because a re-boot does not work either, on re-boot it's still as dead as a paperweight, sometimes, more than then three or four times a day, I have to go through all or some of the above to get the useless thing to work again. I'm using the full suite of Corsair stuff here including the fancy mouse charging pad with USB slot right next to the mouse. I feel cheated, I have a fully updated version of iCUE, and the check boxes properly selected to disable sleep mode and power saving mode. Sometimes after plugging in the device and leaving it for a whole day I return home to find it has not charged at all. I've read many similar problems about this mouse and must say I never expected to be a test user for a product that has turned out to be very poor in performance for me. I'm willing to listen to any probable fixes if anyone can help because I'm fresh out of ideas and patience. Thanks. Link to comment Share on other sites More sharing options...
Apophis3 Posted June 23, 2019 Share Posted June 23, 2019 Just had this issue, mouse sleeping after only a couple of minutes. Fixed by setting sleep to 20 and then saving it to my desired onboard hardware profile. (I don't use soft profiles since I use BT often) I think some settings were internally changed on last firmware update., and they need to be reapplied. Link to comment Share on other sites More sharing options...
SoxmisUK Posted June 23, 2019 Author Share Posted June 23, 2019 Thanks I'll give that a go. Report back after a day or so. Link to comment Share on other sites More sharing options...
SoxmisUK Posted June 24, 2019 Author Share Posted June 24, 2019 Just had this issue, mouse sleeping after only a couple of minutes. Fixed by setting sleep to 20 and then saving it to my desired onboard hardware profile. (I don't use soft profiles since I use BT often) I think some settings were internally changed on last firmware update., and they need to be reapplied. Hi Adophis3 this seems to have solved a lot of my problems! Cheers! Looks like the pairing must have been lost after all thanks to iCUE's poor updating process. Cheers Mate! Link to comment Share on other sites More sharing options...
Apophis3 Posted June 24, 2019 Share Posted June 24, 2019 Hi Adophis3 this seems to have solved a lot of my problems! Cheers! Looks like the pairing must have been lost after all thanks to iCUE's poor updating process. Cheers Mate! Great! Profile conflicts like this happen after a few updates. Now you know what to do next time. Link to comment Share on other sites More sharing options...
Kei Posted June 24, 2019 Share Posted June 24, 2019 Thank you so much! I accidentally clicked on the forum link and saw this by chance which described what my problem. It's a coincidence that I happen to stumble upon this recent thread. Thank you so much! Link to comment Share on other sites More sharing options...
Broritos Posted June 26, 2019 Share Posted June 26, 2019 Also had this exact same issue, set sleep to 20mins then overwrote the profile and set it back to 10mins and overwrote it again and now its fixed Link to comment Share on other sites More sharing options...
John11 Posted June 27, 2019 Share Posted June 27, 2019 how do you save this to your hardware profile? got big problems with my mouse rgb lighting keeps turning off after a few minutes Link to comment Share on other sites More sharing options...
Broritos Posted July 11, 2019 Share Posted July 11, 2019 Update, this does not fix the problem. Problem occurs every time you plug the cable in to charge the mouse, it somehow resets the sleep timer when you unplug the cable. The mouse goes to sleep after like 3 mins. Link to comment Share on other sites More sharing options...
Apophis3 Posted July 11, 2019 Share Posted July 11, 2019 Update, this does not fix the problem. Problem occurs every time you plug the cable in to charge the mouse, it somehow resets the sleep timer when you unplug the cable. The mouse goes to sleep after like 3 mins. Cuz when you unplug it's changing profiles. Make sure your onboard profiles are updated and saved. Link to comment Share on other sites More sharing options...
Recommended Posts