eddorz Posted May 11, 2020 Share Posted May 11, 2020 Hey everyone! New to this forum and new to liquid cooling (recently built my first fully custom liquid build). Before I go further here is my current setup. Fractal Design Meshify S2 Case Asus ROG MAXIMUS X HERO (WI-FI AC) ATX LGA1151 Motherboard Intel Core i7-8700K 3.7 GHz 6-Core Processor Corsair Vengeance RGB 32 GB (4 x 8 GB) DDR4-3000 Memory EVGA GeForce RTX 2080 Ti 11 GB XC ULTRA GAMING Video Card SeaSonic FOCUS Plus Gold 750 W 80+ Gold Certified Power Supply 1 360mm Radiator + 3 Corsair LL120 RGB Fans 1 240mm Radiator + 2 Corsair LL140 RGB Fans 1 Corsair LL140 RGB Fan in the back of the case 1 Water Temp Sensor 1 Pump + Reservoir GPU Water Block CPU Water Block Commander Pro + 6 Port RGB Hub I currently have all 6 fans connected to the hub for RGB and then connected to the Commander pro to control the fans using iQue software. I also have my water temp sensor connected to the Commander Pro as well. The only thing still connected to the motherboard is the GPU water block (RGB/5-volt), CPU water block (RGB/5-volt), and the pump/12-volt. Now that the water temp sensor is connected to the Commander Pro how should I go about configuring my setup so that the pump can read off the water temp sensor? Link to comment Share on other sites More sharing options...
Recommended Posts