Ironclaw DPI button Disable?

There is another thread about this issue

https://forum.corsair.com/v3/showthread.php?t=187841&page=2

 

here is my post from there

 

his is still active to date. I got new IronClaw RGB Wireless and issue is still here. I updated all , program , dongle , mouse to newest versions.

It seems no matter what i assign for DPI up button , he can execute that command but in same time it will trigger DPI increase by some amount and more on second click and more on third click . Only thing which is stopping from doing this is if i assign a sniper command on DPI up , then he never go crazy , he only toggle sniper and on second click he toggle off sniper but dpi stay unchanged . So it is not a hardware but software issue

Anyone found permanent solution, i would really love to have my 2 front buttons. honestly that is one of the reasons i got this mouse , if dpi up and down were 2 buttons under the scroll i would'n even care.

I am having this exact issue after the most recent iCue software update. Even After a going back to older software it is still happening. It is unusable at the moment. Any help would be great.

Quit from ICUE (taskbar, icue, quit)

1 - Turn off the mouse

2 - hold ~3 sec right+left mouse click and turn on the mouse (while holding)

3 - hold 5 more seconds both clicks, the light should be red on the left

 

This will reset the mouse. Now you can create the remap, it should work

The 3.23 beta fixes it slightly for me. However, it loses the mapping after a short while. A quick unplug replug renables iCUE settings for the Darkclaw.

Can you try saving the "disabled" DPI actions to one of the "Iron Claw Wireless HW1-3" profiles.

 

THANK YOU! This worked for me - It's been annoying me so much!