Crash_Override Posted August 31, 2014 Share Posted August 31, 2014 I'm looking for a set of sleeved cables for the latest HX1000i series PSU I got recently and was wondering if the following kit will be compatible: http://www.corsair.com/en-us/professional-individually-sleeved-dc-cable-kit-type-3-generation-2-black Link to comment Share on other sites More sharing options...
Word of Madness Posted August 31, 2014 Share Posted August 31, 2014 It looks like they use the same cables as the RM and AX series units, so you should be fine, but be sure to check with another user or Corsair themselves since I'm not 100% sure. Link to comment Share on other sites More sharing options...
Protocol48 Posted August 31, 2014 Share Posted August 31, 2014 If you look at your PSU on the Corsair Products website, under "downloads" tab on your PSU's webpage, you can get a pdf copy of your PSU manual, a pdf spec. sheet and these two cable compatibility charts. http://www.corsair.com/~/media/Corsair/download-files/manuals/PSU_Sleeved_Compatibility_Matrix2.pdf http://www.corsair.com/~/media/Corsair/download-files/manuals/DC_Cable_consolidation_Rev_28.pdf I should have contacted Tech Service chat before my purchase, as I got my AX860i sleeved cables and several were marked for "AX1200i", and as the cable sheets above show that these PSU's can take different cables, I was a little bit anxious. So it is always good to chat with Corsair beforehand. They are friendly, even when I ask "dumb" questions. These cables are so much more flexible than the enclosed cables. That alone sold me on the cables. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.