The Corsair User Forums  

Go Back   The Corsair User Forums > Corsair Product Discussion > Cooling

Reply
 
Thread Tools Search this Thread Rate Thread Display Modes
  #1  
Old 06-16-2018, 11:06 PM
ChromeD2 ChromeD2 is offline
Registered User
ChromeD2's PC Specs
 
Join Date: Jun 2018
Posts: 10
POST ID # = 959395
ChromeD2 Reputation: 10
Default H115i and 2700X - Contact Issue?

Hello everyone!

Starting a new thread about an issue I'm experiencing, with a clearer topic since the issue is somewhat narrowed down.

A few days ago I finally upgraded my rig from AM3 (FX-8350 @ 4.7GHz, never went past 56C in roughly 1yr of H115i goodness) to AM4 (2700X).
However, after quite a lot of testing, my results aren't the greatest.
Simply put, the coolant temp won't rise more than ~2 degrees C.

While using AMD's Ryzen Master to measure Package temps and Corsair Link to measure the coolant's temps, I've run a few stress tests and while Package temp sits at around 88-91C at 1.425V, 4200MHz, coolant temp just won't go past 33C.

I've tried reseating the cooler over a dozen times with varying thermal paste (Arctic MX-4 and Prolimatech PK-1 in all the patterns I could think of), varying pressure (both the standoffs and the thumbscrews were tightened differently between attempts)

I also noticed between attempts that the thermal paste was always scarce in the middle compared to the edges of the chip, which hints to a contact issue as well. I used the AM4 bracket for the H115i (CW-8960046).

Anyone else using a similar enough setup that's had any issues? Any suggestions for solutions/things to try out?

Thanks in advance for any attempt to help me out here.

Last edited by ChromeD2; 06-16-2018 at 11:37 PM.
Reply With Quote


  #2  
Old 07-20-2018, 12:17 AM
ChromeD2 ChromeD2 is offline
Registered User
ChromeD2's PC Specs
 
Join Date: Jun 2018
Posts: 10
POST ID # = 964468
ChromeD2 Reputation: 10
Default

Solved: After much testing I RMA'd the H115i unit. Replacement came in today and.. it's no longer happening.

I'm fairly sure it was indeed a contact issue due to a deformity, very likely caused by cooling the overclocked 8350 for 1yr'ish.

Hope no one has similar issues but if you do.. RMA is the way to go.
Reply With Quote


  #3  
Old 07-20-2018, 07:10 AM
c-attack c-attack is offline
Registered User
c-attack's PC Specs
 
Join Date: Jun 2014
Posts: 9,023
POST ID # = 964523
c-attack c-attack Reputation: 107
Default

Glad you managed to sort it out.
Reply With Quote


Reply

Tags
2700x, h115i, overheat

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:47 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.