The Corsair User Forums  

Go Back   The Corsair User Forums > Corsair Product Discussion > Cases

Reply
 
Thread Tools Search this Thread Rate Thread Display Modes
  #1  
Old 09-18-2009, 08:45 PM
x509 x509 is offline
Registered User
x509's PC Specs
 
Join Date: Sep 2009
Location: USA
Posts: 432
POST ID # = 417195
x509 Reputation: 10
Default Making the 800D quieter

Here is a quote from an 800D review on Hexus:
"There's also no anti-vibration shim to sit the power supply on, and component-silencing in general doesn't appear to be high on the Obsidian Series 800D's list of priorities."

Full review at http://www.hexus.net/content/item.php?item=19661&page=4

Overall, what have people done, or could do, to reduce noise/vibration in this wonderful case? Without going crazy. And still overclocking, of course.

Thanks.
Reply With Quote


  #2  
Old 09-20-2009, 08:26 AM
Chills Chills is offline
Registered User
Chills's PC Specs
 
Join Date: Sep 2009
Posts: 6
POST ID # = 417337
Chills Reputation: 10
Send a message via MSN to Chills
Idea My fix

I have double side tape and i put some on the rails of the case for the psu but did not remove the upper side plastic to prevent to stick to the psu i think it will work, i am waiting for my final parts to finish my build good luck with yours.
Attached Images
File Type: jpg P1030020.jpg (502.1 KB, 446 views)
File Type: jpg P1030021.jpg (504.4 KB, 439 views)
Reply With Quote


  #3  
Old 09-20-2009, 07:05 PM
boredgunner's Avatar
boredgunner boredgunner is offline
Hardware Enthusiast
boredgunner's PC Specs
 
Join Date: Sep 2009
Location: Lingshan Islands
Posts: 3
POST ID # = 417369
boredgunner Reputation: 10
Default

But the case is almost all steel, so I'm sure it will drown out a lot of noise.

Using some Noctua NF-P12 fans in the optional fan slots may be a good idea, I'm not so sure how the stock Corsair fans compare though.
Reply With Quote


  #4  
Old 09-21-2009, 04:44 PM
Mr_Armageddon's Avatar
Mr_Armageddon Mr_Armageddon is offline
Registered User
Mr_Armageddon's PC Specs
 
Join Date: Jun 2009
Location: Parker, CO
Posts: 238
POST ID # = 417522
Mr_Armageddon Reputation: 10
Default

Another idea that I will be using it to use Weather Barrier Foam Padding. Its made to go into door stops and under your garage door. One side is sticky and one side isn't, plus since its a rubber/foam it has some give to it. You can pick it up at any hardware store in 1/4" thickness or less.

I will post some pictures once my case comes in later this week.
Reply With Quote


  #5  
Old 10-02-2009, 03:44 PM
ljc117 ljc117 is offline
Registered User
 
Join Date: Sep 2009
Posts: 14
POST ID # = 419124
ljc117 Reputation: 10
Default

I think if you take the above suggestions, they are all good. I got my case about 2 weeks now and I am intentionally taking my time working with the case until I order all the guts. Its for Win7 64 so I have some time, plus CPU's, Mem, MB's and alike generally get cheaper the longer you wait ;-)

Anyway, I found this material which is real easy to use, and remove if need be and I used it on every logical internal area of the case like the inside of the cable covers, insides of the disk door's, etc.;

http://www.frozencpu.com/products/30...tl=g33c117s208

Also, these rubber fan mounts are great, and they eliminate the need for an extra fan silencer. I used them to put 3x 120MM silent fants on top;

http://www.frozencpu.com/products/61...tl=g33c111s484

HTH...
Reply With Quote


Reply

Tags
quiet noise overclocking

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:23 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.