The Corsair User Forums  

Go Back   The Corsair User Forums > Corsair Product Discussion > Cooling

Reply
 
Thread Tools Search this Thread Rate Thread Display Modes
  #1  
Old 12-11-2019, 01:01 AM
dkm dkm is offline
Registered User
 
Join Date: Dec 2019
Posts: 3
POST ID # = 1027065
dkm Reputation: 10
Question [H115i Pro] CPU temp high

Hey,

I just made my first water cooled build and I'm a bit worried about the CPU temperature on idle.

config:

Cooler: H115i pro installed on top, in pull configuration
CPU: i7-8700K
MB: Asus Z390-E gaming
Ram: 2x32GB
Case: Define R66
Front: 2 intake fans
Back: 1 Exhaust
(room temp around 20°)

I haven't installed any IOS yet so I can't stress test it, but just checking the BIOS, the CPU runs at around 50-54° and I feel like it's already way high.
I applied a normal amount of thermal paste and the pump should be installed properly.

Again, I'm pretty noobish, so I'll take any info!
Thanks!

Last edited by dkm; 12-11-2019 at 03:36 AM.
Reply With Quote


  #2  
Old 12-11-2019, 07:12 AM
dkm dkm is offline
Registered User
 
Join Date: Dec 2019
Posts: 3
POST ID # = 1027090
dkm Reputation: 10
Default

So there's definitely something wrong.
I've installed windows and LINK and I get those results:

- idle in quiet: around 40°

- simply playing a youtube video: around 75° https://i.imgur.com/mDV7tdz.png

- doing some 3D (photogrammetry) that's fairly CPU intensive, it instantly shoots to 100° and stays there. Even after stopping it barely goes back down to ~70° https://i.imgur.com/xJ72Ovi.png


I've just tried the exact same 3D procedure with my previous computer (a 6y old i7-3820 with a noctua fan) and the CPU temp rarely went above 40°... https://i.imgur.com/FJJFSG4.png

What am I missing there? Should I try to remove then reapply some thermal paste + the pump?
Thanks in advance!
Reply With Quote


  #3  
Old 12-11-2019, 09:32 AM
c-attack c-attack is offline
Registered User
c-attack's PC Specs
 
Join Date: Jun 2014
Posts: 10,125
POST ID # = 1027098
c-attack c-attack Reputation: 107
Default

It reads like a contact issue between the CPU and block. Make sure you have the right standoffs, the bracket on the back of the MB is orientated the right way (and not crooked on the little peg) and then you probably do need to take the block off and check to see if the TIM evenly spread out. I suspect its going to look fairly unblemished.
Reply With Quote


  #4  
Old 12-11-2019, 11:54 AM
dkm dkm is offline
Registered User
 
Join Date: Dec 2019
Posts: 3
POST ID # = 1027112
dkm Reputation: 10
Default

Yeah. The standoffs and bracket were fine but I cleaned up the pump and CPU thoroughly and reapplied a layer of thermal paste and upon restart the changes were drastic.
I'm now around 25° on idle, and running the same 3D test, it never went above 50°.
My sanity is now restored!

Thanks for the input!
Reply With Quote


Reply

Tags
cpu, h115i, temperature, warm

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:26 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.