Dymblos Posted March 2, 2013 Share Posted March 2, 2013 close :cool: Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted March 2, 2013 Corsair Employee Share Posted March 2, 2013 Yes, this will work. Link to comment Share on other sites More sharing options...
Dymblos Posted March 2, 2013 Author Share Posted March 2, 2013 ok :biggrin: Link to comment Share on other sites More sharing options...
gregglee Posted March 2, 2013 Share Posted March 2, 2013 While we're at it, why are the power supply ends of the two esp cables different? The mb ends are the same as shown above, but on my unit one esp cable has a 12 pin and the other an 8 pin connector to the PS box. Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted March 12, 2013 Corsair Employee Share Posted March 12, 2013 Because most board would use 1 8pin EPS connector, if the MB calls out for 2 EPS connector, you would simply use the connector on the PSU that is part of the PCI-E connectors which are 8pin. The main 8pin EPS will have 12pin on the PSU side. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.