The Corsair User Forums  

Go Back   The Corsair User Forums > Corsair Product Discussion > Memory

Reply
 
Thread Tools Search this Thread Rate Thread Display Modes
  #1  
Old 03-08-2011, 04:10 AM
h4mz h4mz is offline
Registered User
h4mz's PC Specs
 
Join Date: Mar 2011
Posts: 4
POST ID # = 492590
h4mz Reputation: 10
Exclamation CMX4GX3M2A1600C9 on GA-EP45T UD3LR

okay, its hear stupid, but i buy RAM that is maybe not listed by corsair on here..
everybody can help me with my details specs how to configuring and tuning this RAM on my Mobo please..
when i use 2 RAM on slot 0 and 2 its no problem
when i use 4 RAM on slot 0-1-2-3 my installed operating system go die (7 ultimate get BSOD), my ubuntu goes freeze
i don't know howto and about setting RAM in bios so i need help on this forum
BTW my MoBo is not listed on here why ? this MoBo is using DDR3 too
Reply With Quote


  #2  
Old 03-08-2011, 03:03 PM
RAM GUY's Avatar
RAM GUY RAM GUY is offline
Corsair Product Guru
 
Join Date: Apr 2001
Location: Fremont, CA
Posts: 118,268
POST ID # = 492657
RAM GUY Reputation: 10
Default

With 4 modules I would suggest you set the memory frequency at DDR1066 or DDr1333 and set the memory Voltage to 1.7 Volts and see if it will pass www.memtest.org.
__________________
Support accounts and tickets can be created at https://support.corsair.com.

Last edited by Wired; 03-08-2011 at 03:06 PM. Reason: fixed link
Reply With Quote


  #3  
Old 03-09-2011, 02:27 AM
h4mz h4mz is offline
Registered User
h4mz's PC Specs
 
Join Date: Mar 2011
Posts: 4
POST ID # = 492752
h4mz Reputation: 10
Arrow thanks for reply

I'll try howto set the bios
i will show the result and i will show to u the result too..
but if there any wrong settings please help to suggest me the right settings
sorry for my really bad english
Reply With Quote


  #4  
Old 03-09-2011, 03:56 AM
h4mz h4mz is offline
Registered User
h4mz's PC Specs
 
Join Date: Mar 2011
Posts: 4
POST ID # = 492759
h4mz Reputation: 10
Arrow setting on 1333

Quote:
Originally Posted by RAM GUY View Post
With 4 modules I would suggest you set the memory frequency at DDR1066 or DDr1333 and set the memory Voltage to 1.7 Volts and see if it will pass www.memtest.org.
this is my setting, i search on google and find this
but this is not work on my board system got freeze and memtest result error
MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster ...............: Auto
CPU Clock Ratio ..........................: 7X
Fine CPU Clock Ratio.....................:.+0.5
CPU Frequency ...........................: 2.5GHz (333x7.5)


Clock Chip Control
Standard Clock Control
CPU Host Clock Control..................: [Enabled]
CPU Host Frequency (Mhz) ............: 333Mhz
PCI Express Frequency (Mhz) .........: 100
C.I.A.2 .................................:[Disabled]


Advanced Clock Control [Press Enter]
CPU Clock Drive...........................: 800mV
PCI Express Clock Drive.................: 800mV
CPU Clock Skew (ps)....................: 0ps
MCH Clock Skew (ps)...................: 0ps


DRAM Performance Control
Performance Enhance...................: [Standard]
(G)MCH Frequency Latch...............: [Auto]
System Memory Multiplier ..............: Auto
Memory Frequency (Mhz) ..............: 1066
DRAM Timing Selectable ................: [Manual]

Standard Timing Control
CAS Latency Time........................ 9
tRCD ................................... 9
tRP'.................................... 9
tRAS.................................... 24

Advanced Timing Control
tRRD.......................................... 4 Auto
tWTR.......................................... 4 Auto
tWR........................................... 8 Auto
tRFC.......................................... 60 Auto
tRTP.......................................... 4 Auto
Command Rate (CMD) ........................... 0 Auto

Driving Strength Profiles
Driving Strength ............................

Channel A
Static tRead Value.........................:8 Auto
tRD Phase0 Adjustment...................: 0 Auto
tRD Phase1 Adjustment...................:0 Auto
tRD Phase2 Adjustment .................:0 Auto
tRD Phase3 Adjustment..................:0 Auto
Trd2rd(Different Rank)....................:9 Auto
Twr2wr(Different Rank)...................:7 Auto
Twr2rd(Different Rank)...................:7 Auto
Trd2wr(Same/Diff Rank)..................:10 Auto
Dimm1 Clock Skew Control...............:Auto ps
Dimm2 Clock Skew Control...............:Auto ps
DDR Write Leveling.....................:Auto
DDR Write Training.....................:Auto

Channel B
Static tRead Value.........................:9 Auto
tRD Phase0 Adjustment...................:1 Auto
tRD Phase1 Adjustment...................:1 Auto
tRD Phase2 Adjustment .................:1 Auto
tRD Phase3 Adjustment..................:0 Auto
Trd2rd(Different Rank)....................:9 Auto
Twr2wr(Different Rank)...................:7 Auto
Twr2rd(Different Rank)...................:7 Auto
Trd2wr(Same/Diff Rank)..................:10 Auto
Dimm1 Clock Skew Control...............:Auto ps
Dimm2 Clock Skew Control...............:Auto ps
DDR Write Leveling.....................:Auto
DDR Write Training.....................:Auto

Motherboard Voltage Control
Voltage Type.………... Manual
CPU
CPU Vcore….……….........................:1.2V
CPU Termination….......................:1.2V
CPU PLL………………….........................:1.550V
CPU Reference.………….......................:0.805V

MCH/ICH
MCH Core……………........................: 1.2V
MCH Reference….…….0.760V...........; <<< Auto
ICH I/O……………….....1.550V............: <<< Auto
ICH Core…………...……1.100V............: <<< Auto

DRAM
DRAM Voltage ……......................: 1.7V
DRAM Termination .…0.750V............: <<< Auto

Advanced Settings
Limit CPUID Max. to 3.....................: [Disabled]
No-Execute Memory Protect............: [Enabled]
CPU Enhanced Halt (C1E)................: [Disabled]
CPU Thermal Monitor 2(TM2) ...........: [Enabled]
CPU EIST Function.........................: Disabled
Virtualization Technology................: Enabled
Reply With Quote


  #5  
Old 03-09-2011, 05:01 PM
RAM GUY's Avatar
RAM GUY RAM GUY is offline
Corsair Product Guru
 
Join Date: Apr 2001
Location: Fremont, CA
Posts: 118,268
POST ID # = 492823
RAM GUY Reputation: 10
Default

t
Standard Timing Control
CAS Latency Time........................ 9
tRCD ................................... 9
tRP'.................................... 9
tRAS.................................... 24

Advanced Timing Control
tRRD.......................................... 4 Auto
tWTR.......................................... 4 Auto
tWR........................................... 8 Auto
tRFC.......................................... 60 Auto
tRTP.......................................... 4 Auto
Command Rate (CMD) .....................2T
MCH/ICH
MCH Core……………........................: 1.4V
__________________
Support accounts and tickets can be created at https://support.corsair.com.
Reply With Quote


  #6  
Old 03-09-2011, 10:06 PM
h4mz h4mz is offline
Registered User
h4mz's PC Specs
 
Join Date: Mar 2011
Posts: 4
POST ID # = 492880
h4mz Reputation: 10
Sad fail to boot in bios

after i update the settings, my box just cannot boot, event in BIOS, so i unplugged 3 power cable 2 from HDD and 1 Optical drive and it is still cannot boot, so i reset the bios finally boot
the latest settings when im cannot boot my box is
Code:
MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster ...............: Auto
CPU Clock Ratio ..........................: 7X
Fine CPU Clock Ratio.....................:.+0.5
CPU Frequency ...........................: 2.5GHz (333x7.5)


Clock Chip Control
Standard Clock Control
CPU Host Clock Control..................: [Enabled]
CPU Host Frequency (Mhz) ............: 333Mhz
PCI Express Frequency (Mhz) .........: 100
C.I.A.2 .................................:[Disabled]


Advanced Clock Control [Press Enter]
CPU Clock Drive...........................: 800mV
PCI Express Clock Drive.................: 800mV
CPU Clock Skew (ps)....................: 0ps
MCH Clock Skew (ps)...................: 0ps


DRAM Performance Control
Performance Enhance...................: [Standard]
(G)MCH Frequency Latch...............: [Auto]
System Memory Multiplier ..............: Auto
Memory Frequency (Mhz) ..............: 1333 ->changed
DRAM Timing Selectable ................: [Manual]

Standard Timing Control
CAS Latency Time........................ 9
tRCD ................................... 9
tRP'.................................... 9
tRAS.................................... 24

Advanced Timing Control
tRRD.......................................... 4 Auto
tWTR.......................................... 4 Auto
tWR........................................... 8 Auto
tRFC.......................................... 60 Auto
tRTP.......................................... 4 Auto
Command Rate (CMD) ........................... 2 Auto ->changed

Driving Strength Profiles
Driving Strength ............................

Channel A
Static tRead Value.........................:8 Auto
tRD Phase0 Adjustment...................: 0 Auto
tRD Phase1 Adjustment...................:0 Auto
tRD Phase2 Adjustment .................:0 Auto
tRD Phase3 Adjustment..................:0 Auto
Trd2rd(Different Rank)....................:9 Auto
Twr2wr(Different Rank)...................:7 Auto
Twr2rd(Different Rank)...................:7 Auto
Trd2wr(Same/Diff Rank)..................:10 Auto
Dimm1 Clock Skew Control...............:Auto ps
Dimm2 Clock Skew Control...............:Auto ps
DDR Write Leveling.....................:Auto
DDR Write Training.....................:Auto

Channel B
Static tRead Value.........................:9 Auto
tRD Phase0 Adjustment...................:1 Auto
tRD Phase1 Adjustment...................:1 Auto
tRD Phase2 Adjustment .................:1 Auto
tRD Phase3 Adjustment..................:0 Auto
Trd2rd(Different Rank)....................:9 Auto
Twr2wr(Different Rank)...................:7 Auto
Twr2rd(Different Rank)...................:7 Auto
Trd2wr(Same/Diff Rank)..................:10 Auto
Dimm1 Clock Skew Control...............:Auto ps
Dimm2 Clock Skew Control...............:Auto ps
DDR Write Leveling.....................:Auto
DDR Write Training.....................:Auto

Motherboard Voltage Control
Voltage Type.………... Manual
CPU
CPU Vcore….……….........................:1.2V
CPU Termination….......................:1.2V
CPU PLL………………….........................:1.550V
CPU Reference.………….......................:0.805V

MCH/ICH
MCH Core……………........................: 1.4V -> changed
MCH Reference….…….0.760V...........; <<< Auto
ICH I/O……………….....1.550V............: <<< Auto
ICH Core…………...……1.100V............: <<< Auto

DRAM
DRAM Voltage ……......................: 1.7V
DRAM Termination .…0.750V............: <<< Auto

Advanced Settings
Limit CPUID Max. to 3.....................: [Disabled]
No-Execute Memory Protect............: [Enabled]
CPU Enhanced Halt (C1E)................: [Disabled]
CPU Thermal Monitor 2(TM2) ...........: [Enabled]
CPU EIST Function.........................: Disabled
Virtualization Technology................: Enabled
now i think im going crazy.. overclocking is fun, but i absolutely have no basic and experience on overclocking the PC.
please suggest me the correct settings
Reply With Quote


  #7  
Old 03-10-2011, 01:30 PM
RAM GUY's Avatar
RAM GUY RAM GUY is offline
Corsair Product Guru
 
Join Date: Apr 2001
Location: Fremont, CA
Posts: 118,268
POST ID # = 492975
RAM GUY Reputation: 10
Default

I am sorry but I cannot tell you how to over clock you should go to an over clocking forum for that. But If the system is still not stable try and set the memory frequency at DDR1066.
__________________
Support accounts and tickets can be created at https://support.corsair.com.
Reply With Quote


Reply

Tags
freeze

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:18 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.