The Corsair User Forums  

Go Back   The Corsair User Forums > Corsair Product Discussion > Cooling

Reply
 
Thread Tools Search this Thread Rate Thread Display Modes
  #1  
Old 08-31-2017, 09:07 AM
HylianKnight HylianKnight is offline
Registered User
HylianKnight's PC Specs
 
Join Date: Aug 2017
Posts: 2
POST ID # = 918378
HylianKnight Reputation: 10
Default H115i+Enthoos Luxe fan controller: How to connect????

So I just put together a new Ryzen 1700x build using a Gigabyte AX370-Gaming K7 board, Corsair H115i, and the Phanteks Luxe. The Phanteks Luxe comes with a pwm fan controller. My mother board manual shows that all of the fan headers suppor pwm on the 4th pin.

I currently have the H115i hooked up to cpu_fan as the instructions say, and the phanteks fan controller hooked up to cpu_opt. unfortunately, all my case fans (hooked up to the fan controller) are running full tilt despite the gigabyte manual saying all fan headers support pwm regulation. I have tried to manually control the case fans but they all run @ 100%.

My question is, does the corsair H115i have to be hooked up to cpu_fan? If not, how would you recommend hooking up the H115i and the phanteks fan controller? Any advice would be greatly appreciated.
Reply With Quote


  #2  
Old 08-31-2017, 02:28 PM
Corsair Blake Corsair Blake is offline
Banned
Corsair Blake's PC Specs
 
Join Date: Jun 2016
Location: Fremont, CA
Posts: 300
POST ID # = 918472
Corsair Blake Reputation: 14
Default

Plug your H115i straight into "CPU_FAN" and set it to PWM 100% within the BIOS. Enter BIOS by pressing the DELETE key and heading over to FAN CONTROL. You should see the settings to change the "FAN/PUMP CONTROL MODE" over to PWM and leave it at 100%.

As far as your fans, we do not support your case and their included PWM fan splitter, so you'll have to get the support from them.

If you have any other questions about our products, please let us know!
Reply With Quote


  #3  
Old 09-04-2017, 02:28 PM
nanotm nanotm is offline
Registered User
nanotm's PC Specs
 
Join Date: Jan 2013
Location: uk
Posts: 65
POST ID # = 918961
nanotm Reputation: 10
Default

Quote:
Originally Posted by HylianKnight View Post
So I just put together a new Ryzen 1700x build using a Gigabyte AX370-Gaming K7 board, Corsair H115i, and the Phanteks Luxe. The Phanteks Luxe comes with a pwm fan controller. My mother board manual shows that all of the fan headers suppor pwm on the 4th pin.

I currently have the H115i hooked up to cpu_fan as the instructions say, and the phanteks fan controller hooked up to cpu_opt. unfortunately, all my case fans (hooked up to the fan controller) are running full tilt despite the gigabyte manual saying all fan headers support pwm regulation. I have tried to manually control the case fans but they all run @ 100%.

My question is, does the corsair H115i have to be hooked up to cpu_fan? If not, how would you recommend hooking up the H115i and the phanteks fan controller? Any advice would be greatly appreciated.
move the pwm controller to a different pwm fan header, cpu_opt mirrors the cpu header...

your pump has a pwm fan cable for the rad fans to connect to and that lets you control the fans and pump speed via corsair link software when the usb lead is connected to the pump and mobo

the other fan controller you can use for any other pwm fans you mount in your case /
Reply With Quote


Reply

Tags
fan controller, gigabyte, h115i, pwm

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:08 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.