The Corsair User Forums  

Go Back   The Corsair User Forums > Corsair Product Discussion > Cases

Reply
 
Thread Tools Search this Thread Rate Thread Display Modes
  #1  
Old 02-21-2011, 05:22 PM
Seraun Seraun is offline
Registered User
Seraun's PC Specs
 
Join Date: Feb 2011
Posts: 4
POST ID # = 490257
Seraun Reputation: 10
Question 600T and ASUS M4A89TD PRO/USB3

So I am going to preface this with I have never built a computer before and this is my first build.

So I just got my Motherboard today and I was installing it on my brand new 600T. Now I know that when the rest of my parts come in the next few days it might make more sense to me, but I am not sure where to hook up all the fan connectors and the USB cable from the control panel.

maybe I am being a little premature in asking but any help from those who have used this combo would be greatly appreciated.
Reply With Quote


  #2  
Old 02-21-2011, 09:43 PM
Seraun Seraun is offline
Registered User
Seraun's PC Specs
 
Join Date: Feb 2011
Posts: 4
POST ID # = 490288
Seraun Reputation: 10
Default

Maybe I am asking the wrong question.


Maybe this is a better one.


Where do I connect the 3-pin connectors for the Fan Controller?
Reply With Quote


  #3  
Old 02-22-2011, 12:42 AM
Mekaw Mekaw is offline
Registered User
Mekaw's PC Specs
 
Join Date: Feb 2011
Posts: 33
POST ID # = 490306
Mekaw Reputation: 10
Default

what do you mean 3 pin connectors for fan controller? you just gotta hook those up to your fans and 4 pin molex to PSU.

I had the mobo until couple days ago, swapped it out with crosshair IV formula
Reply With Quote


  #4  
Old 02-22-2011, 03:55 AM
Seraun Seraun is offline
Registered User
Seraun's PC Specs
 
Join Date: Feb 2011
Posts: 4
POST ID # = 490325
Seraun Reputation: 10
Default

So what goes to the mobo first the fan connector or the connectors from the controller?
Reply With Quote


  #5  
Old 02-22-2011, 04:12 PM
Seraun Seraun is offline
Registered User
Seraun's PC Specs
 
Join Date: Feb 2011
Posts: 4
POST ID # = 490392
Seraun Reputation: 10
Default

Or do i not connect my fans or the fan controller to the mother board at all?

and if that is what you are saying what does the USB cable go to?


The documentation for the 600T I am finding to be somewhat lacking
Reply With Quote


  #6  
Old 02-22-2011, 05:08 PM
Yellowbeard's Avatar
Yellowbeard Yellowbeard is offline
Banned
 
Join Date: Oct 2002
Location: Atlanta,GA, USA.
Posts: 11,531
POST ID # = 490397
Yellowbeard Reputation: 46
Default

You do not connect a fan controller to the MOBO. Connect your fans 1 of 3 ways.

Directly to the PSU.
To the MOBO fan headers.
To the fan controller.
Reply With Quote


  #7  
Old 02-22-2011, 11:38 PM
rogue71 rogue71 is offline
Registered User
rogue71's PC Specs
 
Join Date: Aug 2009
Posts: 109
POST ID # = 490470
rogue71 Reputation: 10
Default

Quote:
Originally Posted by Seraun View Post
Or do i not connect my fans or the fan controller to the mother board at all?

and if that is what you are saying what does the USB cable go to?


The documentation for the 600T I am finding to be somewhat lacking
the fan controller has a bunch of small 3 pin connectors that come with "caps," in case you dont use them all. those get connected to your case fans. then you plug the large 4pin molex connector to the psu to get your power. the fan controller is there so you dont have to plug the fans into the motherboard and you can still control the fan speed, for whatever its worth.
Reply With Quote


Reply

Tags
600t, fan controller, fans, m4a89td pro/usb3

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:21 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.