iCUE v3.21.88 Patch Notes

[Corsair James]

Originally Posted by Sacco Belmonte

Can you guys please make the corsair service not to use 1% / 1.5% constantly?

Even with a static light and the SDK disabled the service still uses more CPU that it should.

Can you please! oh please! add custom pump speeds? My H115i Pro quiet speed of 1100RPM is bascially useles (doesn't move enough water) and I would love to have it at 1500RPM or so. Pleeeease! I sent a report to tech support, they said they were gonna look into it and got no news, that was a year ago.

Pump speed configuration is actually dependent on hardware - we can't control through software what the hardware doesn't allow.

[Corsair James]

Originally Posted by Falcon2045

As there is finally a HWINFO beta that contains support for Ryzen CPUs... Does this iCue build finally have support for Ryzen systems?

Not yet, we may do so next version after CPUID updates their SDK.

[Corsair James]

Originally Posted by Malustra

Still waiting for a fix, that the K68 RGB Keyboard saves the hardwareprofile. :-(
When I try to save my profile in iCue to the keyboards OnBoard memory, the profile is gone
after iCue is turned off or the computer is in standby mode.
The support told me, the issue is known and will be fixed.

K68 RGB doesn't support hardware profiles.

[Sacco Belmonte]

Originally Posted by Corsair James

Pump speed configuration is actually dependent on hardware - we can't control through software what the hardware doesn't allow.

But you're the guys that could ask Corsair directly for that. Maybe we don't need custom pump speeds, but change 1100 RPM to 1500 or 1600RPM

I'm just a customer. They will never listen to me.

[Sengutso]

Hello guys, i just download this today and when i check the windows bitrate it only shows 2 channel where on the 8.20 version it shows 8 channel by the way im using the virtuoso headset

[Corsair James]

Originally Posted by Sacco Belmonte

But you're the guys that could ask Corsair directly for that. Maybe we don't need custom pump speeds, but change 1100 RPM to 1500 or 1600RPM

I'm just a customer. They will never listen to me.

This isn't true. We always listen, but sometimes there are reasons why we can't do XYZ. In this case, the assumption is increasing speed would contribute to performance but this may not be the case. There may also be reasons why the speed can't be changed to XYZ but I'd have to find out specifically why from the respective team.

[demonking]

Still crashes when i try to import a profile -_-

[emsir]

Your pump should run at full speed. If not you have to do something in settings

In ICUE you go in to cooler settings. Here you see fan 1 - fan 2 - pump

to the left click Performance > Extreme. click Pump and highlight pump (yellow)
If it doesn't change to extreme. Do this: Highlight Pump and then click Extreme to the left. When done you see Extreme under Pump and it will run at full speed.

[chefkoech]

Hi,
Mir wurde heut morgen das Update auf die neue Version angezeigt welches ich auch sofort runtergeladen habe doch beim installieren wurde dann meine Maus und Tastatur deaktiviert und ich konnte den jetzt neu Starten Button nicht mehr betätigen. ergo auch die Installation nicht korrekt beenden. auch eine Alte Maus anzuschließen hat nicht funktioniert. scheinbar habe ich jetzt die neue Version drauf mein Profile sind wohl auch noch gespeichert aber die Tastenbelegung für meine Maus funktioniert nicht mehr in CS GO und ich kann mir auch nicht mehr das ICUE Fenster anzeigen lassen. Per Rechtsklick auf das ICUE Symbol werden mir zwar noch die optionen angezeigt aber ein klick darauf zeigt keine Wirkung.

[PJH]

Originally Posted by demonking

Still crashes when i try to import a profile -_-

Hey, hey!

What profile? Could you link to it? Some of Schwitz profiles are known to crash in later versions of iCUE. I believe they fixed most of them, so if indeed it is one of theirs, perhaps see if that particular one has been updated recently.

If not one of Schwitz, which one in particular? One from Alex's RGB Site? An older one from CUE1?

[xIHighVoltageIx]

Corsair VOID PRO Mic is not really works. I rollback to 3.20.80 an all fine. I can scream but Mic is not really activ and i put sensivity on Max Settings :(

[Sacco Belmonte]

Originally Posted by Corsair James

This isn't true. We always listen, but sometimes there are reasons why we can't do XYZ. In this case, the assumption is increasing speed would contribute to performance but this may not be the case. There may also be reasons why the speed can't be changed to XYZ but I'd have to find out specifically why from the respective team.

I just know 1100RPM moves so little water, the coolant temps start rising slowly if I push the PC a little.

I rather have the pump at 1600 for a good noise / flow compromise. At 1100RPM the cooling capability is too far on the low side.

[Gavote]

Originally Posted by Sacco Belmonte

I just know 1100RPM moves so little water, the coolant temps start rising slowly if I push the PC a little.

I rather have the pump at 1600 for a good noise / flow compromise. At 1100RPM the cooling capability is too far on the low side.

Quick pointer: If your coolant temp and CPU/GPU temps slowly rise at the same rate, you need to increase your fan speed.

If your CPU/GPU temps climb and the coolant stays static, this means your pump isn't running fast enough.

[Sacco Belmonte]

Is not that :) I know very well how it works. I just think 1100RPM is just too slow waterflow going through the block. Corsair tuned that speed real slow, hence is useless.

[n0ahg]

Originally Posted by Corsair James

Not yet, we may do so next version after CPUID updates their SDK.

Still no support for Gigabyte Z390 M Gaming. I worked with cpuid over two months ago to get a beta of hwmonitor to see the montherboard sensors but the support must also be waiting for a sdk update :-(